{"title":"Pyroelectric Laser Energy Meters","description":"\u003cp\u003eBrowse 14+ lasers from WaveQuanta's catalog. Detailed specifications, datasheets, and 3D models available for each product. Request a quote today.\u003c\/p\u003e","products":[{"product_id":"pyroelectric-laser-energy-meters-pem710","title":"Pyroelectric Laser Energy Meters PEM710","description":"\u003ch2\u003eUniversal Power Meter\/Energy Meter — Model PEM710\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eCompatible with thermopile detectors and pyroelectric detectors\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe LBPEM710 meter is suitable for thermopile detectors and pyroelectric detectors, used to measure the optical power of continuous lasers or the energy of pulsed lasers. The user interface features a high-resolution graphic display and capacitive touch screen, with a 7-inch display equipped with backlighting. Capacitive touch buttons enable quick access to set the source wavelength or spectrum. In simple operation mode, power and energy measurements can be viewed via analog output or digital display. It also supports recording data and saving it to the device's internal memory. Users can connect the device to a PC via USB interface to modify and copy saved files. The LBPEM710 meter is compatible with pyroelectric laser energy meters and covers a wavelength range of 190 nm to 25 μm.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompatible with thermopile detectors and pyroelectric detectors\u003c\/li\u003e\n  \u003cli\u003e7-inch touchscreen with backlight\u003c\/li\u003e\n  \u003cli\u003eAnalog output and digital display available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47911079280794,"sku":"PEM710","price":5236.13,"currency_code":"SGD","in_stock":true}]},{"product_id":"pyroelectric-laser-energy-meters-pem45-hp","title":"Pyroelectric Laser Energy Meters PEM45-HP","description":"\u003ch2\u003eStandard Pyroelectric Laser Energy Meter — Model PEM45-HP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eFor pulsed laser measurement\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe LBTEK standard pyroelectric laser energy meter is used for measuring pulsed lasers. The pyroelectric sensor converts the energy of light pulses into voltage pulses and is not suitable for continuous laser measurement. Due to its black coating, which exhibits a flat absorption curve within the 190 nm–25 μm wavelength range, it is particularly well-suited for low-power, wavelength-independent energy measurements. Among them, the LBPEM20\/45-HP offers higher average power density. Additionally, the energy meter can be directly connected to an oscilloscope with a 1 MΩ input resistance or an LBPEM710 meter via a BNC connector. To accommodate higher repetition rates when connected to an oscilloscope, the load resistance can be reduced. The LBTEK general-purpose pyroelectric laser energy meter provides optional effective detection areas of 4 mm, 8 mm, 11 mm, 20 mm, 21 mm, 34 mm, and 45 mm. The energy meter includes a 1.5 m-long connecting cable with BNC and E connectors on either end. Note: The energy meter includes a mounting rod but does not come with a base.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor pulsed laser measurement\u003c\/li\u003e\n  \u003cli\u003eBlack coating with flat response over a wide wavelength range\u003c\/li\u003e\n  \u003cli\u003eVarious effective detection area available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47911079346330,"sku":"PEM45-HP","price":4204.79,"currency_code":"SGD","in_stock":true}]},{"product_id":"pyroelectric-laser-energy-meters-pem20-hp","title":"Pyroelectric Laser Energy Meters PEM20-HP","description":"\u003ch2\u003eStandard Pyroelectric Laser Energy Meter — Model PEM20-HP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eFor pulsed laser measurement\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe LBTEK standard pyroelectric laser energy meter is used for measuring pulsed lasers. The pyroelectric sensor converts the energy of light pulses into voltage pulses and is not suitable for continuous laser measurement. Due to its black coating, which exhibits a flat absorption curve within the 190 nm–25 μm wavelength range, it is particularly well-suited for low-power, wavelength-independent energy measurements. Among them, the LBPEM20\/45-HP offers higher average power density. Additionally, the energy meter can be directly connected to an oscilloscope with a 1 MΩ input resistance or an LBPEM710 meter via a BNC connector. To accommodate higher repetition rates when connected to an oscilloscope, the load resistance can be reduced. The LBTEK general-purpose pyroelectric laser energy meter provides optional effective detection areas of 4 mm, 8 mm, 11 mm, 20 mm, 21 mm, 34 mm, and 45 mm. The energy meter includes a 1.5 m-long connecting cable with BNC and E connectors on either end. Note: The energy meter includes a mounting rod but does not come with a base.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor pulsed laser measurement\u003c\/li\u003e\n  \u003cli\u003eBlack coating with flat response over a wide wavelength range\u003c\/li\u003e\n  \u003cli\u003eVarious effective detection area available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47911079542938,"sku":"PEM20-HP","price":3887.44,"currency_code":"SGD","in_stock":true}]},{"product_id":"pyroelectric-laser-energy-meters-pem34","title":"Pyroelectric Laser Energy Meters PEM34","description":"\u003ch2\u003eStandard Pyroelectric Laser Energy Meter — Model PEM34\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eFor pulsed laser measurement\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe LBTEK standard pyroelectric laser energy meter is used for measuring pulsed lasers. The pyroelectric sensor converts the energy of light pulses into voltage pulses and is not suitable for continuous laser measurement. Due to its black coating, which exhibits a flat absorption curve within the 190 nm–25 μm wavelength range, it is particularly well-suited for low-power, wavelength-independent energy measurements. Among them, the LBPEM20\/45-HP offers higher average power density. Additionally, the energy meter can be directly connected to an oscilloscope with a 1 MΩ input resistance or an LBPEM710 meter via a BNC connector. To accommodate higher repetition rates when connected to an oscilloscope, the load resistance can be reduced. The LBTEK general-purpose pyroelectric laser energy meter provides optional effective detection areas of 4 mm, 8 mm, 11 mm, 20 mm, 21 mm, 34 mm, and 45 mm. The energy meter includes a 1.5 m-long connecting cable with BNC and E connectors on either end. Note: The energy meter includes a mounting rod but does not come with a base.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor pulsed laser measurement\u003c\/li\u003e\n  \u003cli\u003eBlack coating with flat response over a wide wavelength range\u003c\/li\u003e\n  \u003cli\u003eVarious effective detection area available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47911079674010,"sku":"PEM34","price":3892.74,"currency_code":"SGD","in_stock":true}]},{"product_id":"pyroelectric-laser-energy-meters-pem21","title":"Pyroelectric Laser Energy Meters PEM21","description":"\u003ch2\u003eStandard Pyroelectric Laser Energy Meter — Model PEM21\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eFor pulsed laser measurement\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe LBTEK standard pyroelectric laser energy meter is used for measuring pulsed lasers. The pyroelectric sensor converts the energy of light pulses into voltage pulses and is not suitable for continuous laser measurement. Due to its black coating, which exhibits a flat absorption curve within the 190 nm–25 μm wavelength range, it is particularly well-suited for low-power, wavelength-independent energy measurements. Among them, the LBPEM20\/45-HP offers higher average power density. Additionally, the energy meter can be directly connected to an oscilloscope with a 1 MΩ input resistance or an LBPEM710 meter via a BNC connector. To accommodate higher repetition rates when connected to an oscilloscope, the load resistance can be reduced. The LBTEK general-purpose pyroelectric laser energy meter provides optional effective detection areas of 4 mm, 8 mm, 11 mm, 20 mm, 21 mm, 34 mm, and 45 mm. The energy meter includes a 1.5 m-long connecting cable with BNC and E connectors on either end. Note: The energy meter includes a mounting rod but does not come with a base.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor pulsed laser measurement\u003c\/li\u003e\n  \u003cli\u003eBlack coating with flat response over a wide wavelength range\u003c\/li\u003e\n  \u003cli\u003eVarious effective detection area available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47911079772314,"sku":"PEM21","price":4046.12,"currency_code":"SGD","in_stock":true}]},{"product_id":"pyroelectric-laser-energy-meters-pem11","title":"Pyroelectric Laser Energy Meters PEM11","description":"\u003ch2\u003eStandard Pyroelectric Laser Energy Meter — Model PEM11\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eFor pulsed laser measurement\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe LBTEK standard pyroelectric laser energy meter is used for measuring pulsed lasers. The pyroelectric sensor converts the energy of light pulses into voltage pulses and is not suitable for continuous laser measurement. Due to its black coating, which exhibits a flat absorption curve within the 190 nm–25 μm wavelength range, it is particularly well-suited for low-power, wavelength-independent energy measurements. Among them, the LBPEM20\/45-HP offers higher average power density. Additionally, the energy meter can be directly connected to an oscilloscope with a 1 MΩ input resistance or an LBPEM710 meter via a BNC connector. To accommodate higher repetition rates when connected to an oscilloscope, the load resistance can be reduced. The LBTEK general-purpose pyroelectric laser energy meter provides optional effective detection areas of 4 mm, 8 mm, 11 mm, 20 mm, 21 mm, 34 mm, and 45 mm. The energy meter includes a 1.5 m-long connecting cable with BNC and E connectors on either end. Note: The energy meter includes a mounting rod but does not come with a base.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor pulsed laser measurement\u003c\/li\u003e\n  \u003cli\u003eBlack coating with flat response over a wide wavelength range\u003c\/li\u003e\n  \u003cli\u003eVarious effective detection area available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47911079870618,"sku":"PEM11","price":3437.9,"currency_code":"SGD","in_stock":true}]},{"product_id":"pyroelectric-laser-energy-meters-pem8","title":"Pyroelectric Laser Energy Meters PEM8","description":"\u003ch2\u003eStandard Pyroelectric Laser Energy Meter — Model PEM8\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eFor pulsed laser measurement\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe LBTEK standard pyroelectric laser energy meter is used for measuring pulsed lasers. The pyroelectric sensor converts the energy of light pulses into voltage pulses and is not suitable for continuous laser measurement. Due to its black coating, which exhibits a flat absorption curve within the 190 nm–25 μm wavelength range, it is particularly well-suited for low-power, wavelength-independent energy measurements. Among them, the LBPEM20\/45-HP offers higher average power density. Additionally, the energy meter can be directly connected to an oscilloscope with a 1 MΩ input resistance or an LBPEM710 meter via a BNC connector. To accommodate higher repetition rates when connected to an oscilloscope, the load resistance can be reduced. The LBTEK general-purpose pyroelectric laser energy meter provides optional effective detection areas of 4 mm, 8 mm, 11 mm, 20 mm, 21 mm, 34 mm, and 45 mm. The energy meter includes a 1.5 m-long connecting cable with BNC and E connectors on either end. Note: The energy meter includes a mounting rod but does not come with a base.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor pulsed laser measurement\u003c\/li\u003e\n  \u003cli\u003eBlack coating with flat response over a wide wavelength range\u003c\/li\u003e\n  \u003cli\u003eVarious effective detection area available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47911079968922,"sku":"PEM8","price":3305.64,"currency_code":"SGD","in_stock":true}]},{"product_id":"pyroelectric-laser-energy-meters-pem4","title":"Pyroelectric Laser Energy Meters PEM4","description":"\u003ch2\u003eStandard Pyroelectric Laser Energy Meter — Model PEM4\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eFor pulsed laser measurement\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe LBTEK standard pyroelectric laser energy meter is used for measuring pulsed lasers. The pyroelectric sensor converts the energy of light pulses into voltage pulses and is not suitable for continuous laser measurement. Due to its black coating, which exhibits a flat absorption curve within the 190 nm–25 μm wavelength range, it is particularly well-suited for low-power, wavelength-independent energy measurements. Among them, the LBPEM20\/45-HP offers higher average power density. Additionally, the energy meter can be directly connected to an oscilloscope with a 1 MΩ input resistance or an LBPEM710 meter via a BNC connector. To accommodate higher repetition rates when connected to an oscilloscope, the load resistance can be reduced. The LBTEK general-purpose pyroelectric laser energy meter provides optional effective detection areas of 4 mm, 8 mm, 11 mm, 20 mm, 21 mm, 34 mm, and 45 mm. The energy meter includes a 1.5 m-long connecting cable with BNC and E connectors on either end. Note: The energy meter includes a mounting rod but does not come with a base.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor pulsed laser measurement\u003c\/li\u003e\n  \u003cli\u003eBlack coating with flat response over a wide wavelength range\u003c\/li\u003e\n  \u003cli\u003eVarious effective detection area available\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47911080034458,"sku":"PEM4","price":3067.65,"currency_code":"SGD","in_stock":true}]},{"product_id":"pyroelectric-laser-energy-meters-pem45-k","title":"Pyroelectric Laser Energy Meters PEM45-K","description":"\u003ch2\u003eHigh-Energy Pyroelectric Laser Energy Meter — Model PEM45-K\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSuitable for measuring high-energy pulsed lasers up to 15 J\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe LBTEK High-Energy Pyroelectric Laser Energy Meter is designed for measuring high-energy pulsed lasers, making it highly suitable for excimer lasers, CO\u003csub\u003e2\u003c\/sub\u003e-TEA lasers, and ND:YAG lasers. The pyroelectric sensor converts the energy of light pulses into voltage pulses and is not suitable for continuous laser measurements. The ceramic coating of the high-energy pyroelectric laser energy meter features a flat absorption curve within the 190 nm–25 μm wavelength range. Among them, the LBPEM20-K energy meter can measure high-energy laser pulses up to 3 J, while the LBPEM45-K can measure high-energy laser pulses up to 15 J. Additionally, the meter can be directly connected to an oscilloscope with a 1 MΩ input resistance or the LBPEM710 meter via a BNC connector. To accommodate higher repetition rates when connected to an oscilloscope, the load resistance can be reduced. Our product offers optional effective detection areas of 20 mm and 45 mm. The energy meter includes a 1.5 m-long connecting cable with BNC and E connectors on each end. Note: The energy meter includes a mounting rod but does not come with a base for sale.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for measuring high-energy pulsed lasers up to 15 J\u003c\/li\u003e\n  \u003cli\u003eCeramic coating with high damage threshold, suitable for high energy density (up to 1 J\/cm²) lasers\u003c\/li\u003e\n  \u003cli\u003eAvailable with optional 20 mm or 45 mm effective detection area\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47911080132762,"sku":"PEM45-K","price":5236.13,"currency_code":"SGD","in_stock":true}]},{"product_id":"pyroelectric-laser-energy-meters-pem20-k","title":"Pyroelectric Laser Energy Meters PEM20-K","description":"\u003ch2\u003eHigh-Energy Pyroelectric Laser Energy Meter — Model PEM20-K\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSuitable for measuring high-energy pulsed lasers up to 15 J\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe LBTEK High-Energy Pyroelectric Laser Energy Meter is designed for measuring high-energy pulsed lasers, making it highly suitable for excimer lasers, CO\u003csub\u003e2\u003c\/sub\u003e-TEA lasers, and ND:YAG lasers. The pyroelectric sensor converts the energy of light pulses into voltage pulses and is not suitable for continuous laser measurements. The ceramic coating of the high-energy pyroelectric laser energy meter features a flat absorption curve within the 190 nm–25 μm wavelength range. Among them, the LBPEM20-K energy meter can measure high-energy laser pulses up to 3 J, while the LBPEM45-K can measure high-energy laser pulses up to 15 J. Additionally, the meter can be directly connected to an oscilloscope with a 1 MΩ input resistance or the LBPEM710 meter via a BNC connector. To accommodate higher repetition rates when connected to an oscilloscope, the load resistance can be reduced. Our product offers optional effective detection areas of 20 mm and 45 mm. The energy meter includes a 1.5 m-long connecting cable with BNC and E connectors on each end. Note: The energy meter includes a mounting rod but does not come with a base for sale.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for measuring high-energy pulsed lasers up to 15 J\u003c\/li\u003e\n  \u003cli\u003eCeramic coating with high damage threshold, suitable for high energy density (up to 1 J\/cm²) lasers\u003c\/li\u003e\n  \u003cli\u003eAvailable with optional 20 mm or 45 mm effective detection area\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47911080329370,"sku":"PEM20-K","price":4575.01,"currency_code":"SGD","in_stock":true}]},{"product_id":"pyroelectric-laser-energy-meters-pem24-hirep-uv","title":"Pyroelectric Laser Energy Meters PEM24-HiRep-UV","description":"\u003ch2\u003eFast-Response Pyroelectric Laser Energy Meter — Model PEM24-HiRep-UV\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eFor measuring pulsed lasers with repetition rates up to 2.5 kHz\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe LBTEK fast-response pyroelectric laser energy meter is designed for measuring pulsed lasers with repetition rates up to 2.5 kHz. The pyroelectric sensor converts the energy of optical pulses into voltage pulses and is not suitable for continuous laser measurement. The LBPEMxx-HiRep features a black coating, providing a flat response from 190 nm to 25 μm and supporting measurements at repetition rates up to 750 Hz. The LBPEMxx-HIRep-UV has a metallic coating, offering a flat response from 190 nm to 2.5 μm and supporting detection at repetition rates up to 2.5 kHz, depending on the effective detection size. The energy meter can be directly connected to an oscilloscope with a 1 MΩ input resistance or an LBPEM710 meter via BNC connectors. The LBTEK fast-response pyroelectric laser energy meter is available with effective detection areas of 12 mm or 24 mm. The energy meter includes a 1.5 m long connecting cable with BNC and E connectors at each end.\n\nNote: The energy meter includes a mounting rod but is sold without a base.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor measuring pulsed lasers with repetition rates up to 2.5 kHz\u003c\/li\u003e\n  \u003cli\u003eTwo coating options available: black coating for working wavelengths of 190 nm -25 μm and metallic coating for working wavelengths of 190-2500 nm\u003c\/li\u003e\n  \u003cli\u003eAvailable with 12 mm or 24 mm active detection area\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47911080427674,"sku":"PEM24-HiRep-UV","price":3675.88,"currency_code":"SGD","in_stock":true}]},{"product_id":"pyroelectric-laser-energy-meters-pem12-hirep-uv","title":"Pyroelectric Laser Energy Meters PEM12-HiRep-UV","description":"\u003ch2\u003eFast-Response Pyroelectric Laser Energy Meter — Model PEM12-HiRep-UV\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eFor measuring pulsed lasers with repetition rates up to 2.5 kHz\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe LBTEK fast-response pyroelectric laser energy meter is designed for measuring pulsed lasers with repetition rates up to 2.5 kHz. The pyroelectric sensor converts the energy of optical pulses into voltage pulses and is not suitable for continuous laser measurement. The LBPEMxx-HiRep features a black coating, providing a flat response from 190 nm to 25 μm and supporting measurements at repetition rates up to 750 Hz. The LBPEMxx-HIRep-UV has a metallic coating, offering a flat response from 190 nm to 2.5 μm and supporting detection at repetition rates up to 2.5 kHz, depending on the effective detection size. The energy meter can be directly connected to an oscilloscope with a 1 MΩ input resistance or an LBPEM710 meter via BNC connectors. The LBTEK fast-response pyroelectric laser energy meter is available with effective detection areas of 12 mm or 24 mm. The energy meter includes a 1.5 m long connecting cable with BNC and E connectors at each end.\n\nNote: The energy meter includes a mounting rod but is sold without a base.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor measuring pulsed lasers with repetition rates up to 2.5 kHz\u003c\/li\u003e\n  \u003cli\u003eTwo coating options available: black coating for working wavelengths of 190 nm -25 μm and metallic coating for working wavelengths of 190-2500 nm\u003c\/li\u003e\n  \u003cli\u003eAvailable with 12 mm or 24 mm active detection area\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47911080525978,"sku":"PEM12-HiRep-UV","price":3305.64,"currency_code":"SGD","in_stock":true}]},{"product_id":"pyroelectric-laser-energy-meters-pem24-hirep","title":"Pyroelectric Laser Energy Meters PEM24-HiRep","description":"\u003ch2\u003eFast-Response Pyroelectric Laser Energy Meter — Model PEM24-HiRep\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eFor measuring pulsed lasers with repetition rates up to 2.5 kHz\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe LBTEK fast-response pyroelectric laser energy meter is designed for measuring pulsed lasers with repetition rates up to 2.5 kHz. The pyroelectric sensor converts the energy of optical pulses into voltage pulses and is not suitable for continuous laser measurement. The LBPEMxx-HiRep features a black coating, providing a flat response from 190 nm to 25 μm and supporting measurements at repetition rates up to 750 Hz. The LBPEMxx-HIRep-UV has a metallic coating, offering a flat response from 190 nm to 2.5 μm and supporting detection at repetition rates up to 2.5 kHz, depending on the effective detection size. The energy meter can be directly connected to an oscilloscope with a 1 MΩ input resistance or an LBPEM710 meter via BNC connectors. The LBTEK fast-response pyroelectric laser energy meter is available with effective detection areas of 12 mm or 24 mm. The energy meter includes a 1.5 m long connecting cable with BNC and E connectors at each end.\n\nNote: The energy meter includes a mounting rod but is sold without a base.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor measuring pulsed lasers with repetition rates up to 2.5 kHz\u003c\/li\u003e\n  \u003cli\u003eTwo coating options available: black coating for working wavelengths of 190 nm -25 μm and metallic coating for working wavelengths of 190-2500 nm\u003c\/li\u003e\n  \u003cli\u003eAvailable with 12 mm or 24 mm active detection area\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47911080624282,"sku":"PEM24-HiRep","price":3755.21,"currency_code":"SGD","in_stock":true}]},{"product_id":"pyroelectric-laser-energy-meters-pem12-hirep","title":"Pyroelectric Laser Energy Meters PEM12-HiRep","description":"\u003ch2\u003eFast-Response Pyroelectric Laser Energy Meter — Model PEM12-HiRep\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eFor measuring pulsed lasers with repetition rates up to 2.5 kHz\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe LBTEK fast-response pyroelectric laser energy meter is designed for measuring pulsed lasers with repetition rates up to 2.5 kHz. The pyroelectric sensor converts the energy of optical pulses into voltage pulses and is not suitable for continuous laser measurement. The LBPEMxx-HiRep features a black coating, providing a flat response from 190 nm to 25 μm and supporting measurements at repetition rates up to 750 Hz. The LBPEMxx-HIRep-UV has a metallic coating, offering a flat response from 190 nm to 2.5 μm and supporting detection at repetition rates up to 2.5 kHz, depending on the effective detection size. The energy meter can be directly connected to an oscilloscope with a 1 MΩ input resistance or an LBPEM710 meter via BNC connectors. The LBTEK fast-response pyroelectric laser energy meter is available with effective detection areas of 12 mm or 24 mm. The energy meter includes a 1.5 m long connecting cable with BNC and E connectors at each end.\n\nNote: The energy meter includes a mounting rod but is sold without a base.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor measuring pulsed lasers with repetition rates up to 2.5 kHz\u003c\/li\u003e\n  \u003cli\u003eTwo coating options available: black coating for working wavelengths of 190 nm -25 μm and metallic coating for working wavelengths of 190-2500 nm\u003c\/li\u003e\n  \u003cli\u003eAvailable with 12 mm or 24 mm active detection area\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47911081017498,"sku":"PEM12-HiRep","price":3437.9,"currency_code":"SGD","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/collections\/pyroelectric-laser-energy-meters-cover.jpg?v=1777192748","url":"https:\/\/waveqvanta.com\/collections\/lbtek-light-analysis-power-energy-meters-pyroelectric-laser-energy-meters.oembed","provider":"WaveQuanta","version":"1.0","type":"link"}