{"title":"Optics - Dichroic Mirrors","description":"\u003cp\u003eBrowse 118+ mirrors from WaveQuanta's catalog. Part of our precision optical components and lenses range. Detailed specifications, datasheets, and 3D models available for each product. Request a quote today.\u003c\/p\u003e","products":[{"product_id":"nd-yag-harmonic-beamsplitters-hdm05-355r-532-1064t","title":"UVFS, Nd:YAG Harmonic Beamsplitters, Ø12.7 mm HDM05-355R-532\u00261064T","description":"\u003ch2\u003eUVFS, Nd:YAG Harmonic Beamsplitters, Ø12.7 mm — Model HDM05-355R-532\u0026amp;1064T\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UVFS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront\/back surfaces coated with beamsplitter coating\/anti-reflective coatings respectively\u003c\/li\u003e\n\u003cli\u003eFour wavelength designs suitable for Nd:YAG laser applications\u003c\/li\u003e\n\u003cli\u003e30 arcmin wedge design on both surfaces to separate reflected and transmitted light\u003c\/li\u003e\n\u003cli\u003eAvailable in Ø12.7 mm and Ø25.4 mm diameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen using Nd:YAG lasers, it is often necessary to distinguish the fundamental frequency of the output laser from its harmonic components. LBTEK Nd:YAG Harmonic Beamsplitters utilize the transmission and reflection effects of different optical coatings on different wavelengths. The incident surface is coated with a beamsplitter coating, effectively separating the harmonics of the Nd:YAG laser. The output surface is coated with a V-type AR coating, minimizing reflections at the air-glass interface within a specific wavelength band (compared to the typical reflectivity of 4% on uncoated optical surfaces, the AR coating reduces the average reflectivity of each surface to below 0.5% within the specified wavelength band). Combined with a 30-arcmin wedge structure, this effectively reduces interference effects between reflected light from the incident and output surfaces. \nLBTEK offers Nd:YAG harmonic beamsplitters in four wavelength configurations and two sizes: Ø12.7 mm and Ø25.4 mm. LBTEK also offers a variety of customization services, including custom sizes and design wavelengths. For specific customization requirements, please contact LBTEK Technical Support.\u003c\/p\u003e\n\u003ch3\u003eUVFS, Nd:YAG Harmonic Beamsplitters, Ø12.7 mm\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCommonly used for separating Nd:YAG laser harmonics\u003c\/li\u003e\n\u003cli\u003eCan be used for optical path deflection\u003c\/li\u003e\n\u003cli\u003eHarmonic wavelengths: 266 nm, 355 nm, 532 nm, and 1064 nm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eØ12.7 mm Nd:YAG Harmonic Beamsplitter mounted on AMM3-05C\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516268724378,"sku":"HDM05-355R-532\u00261064T","price":177.02,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1UVFS_EF_BC_8CNdYAG_E8_B0_90_E6_B3_A2_E5_88_86_E5_85_89_E9_95_9C_EF_BC_8C_C3_9812.7_20mm-FhJn7LrR5793-9p0fadjjcPRRmZF.jpg?v=1772650487"},{"product_id":"nd-yag-harmonic-beamsplitters-hdm05-532r-1064t","title":"UVFS, Nd:YAG Harmonic Beamsplitters, Ø12.7 mm HDM05-532R-1064T","description":"\u003ch2\u003eUVFS, Nd:YAG Harmonic Beamsplitters, Ø12.7 mm — Model HDM05-532R-1064T\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UVFS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront\/back surfaces coated with beamsplitter coating\/anti-reflective coatings respectively\u003c\/li\u003e\n\u003cli\u003eFour wavelength designs suitable for Nd:YAG laser applications\u003c\/li\u003e\n\u003cli\u003e30 arcmin wedge design on both surfaces to separate reflected and transmitted light\u003c\/li\u003e\n\u003cli\u003eAvailable in Ø12.7 mm and Ø25.4 mm diameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen using Nd:YAG lasers, it is often necessary to distinguish the fundamental frequency of the output laser from its harmonic components. LBTEK Nd:YAG Harmonic Beamsplitters utilize the transmission and reflection effects of different optical coatings on different wavelengths. The incident surface is coated with a beamsplitter coating, effectively separating the harmonics of the Nd:YAG laser. The output surface is coated with a V-type AR coating, minimizing reflections at the air-glass interface within a specific wavelength band (compared to the typical reflectivity of 4% on uncoated optical surfaces, the AR coating reduces the average reflectivity of each surface to below 0.5% within the specified wavelength band). Combined with a 30-arcmin wedge structure, this effectively reduces interference effects between reflected light from the incident and output surfaces. \nLBTEK offers Nd:YAG harmonic beamsplitters in four wavelength configurations and two sizes: Ø12.7 mm and Ø25.4 mm. LBTEK also offers a variety of customization services, including custom sizes and design wavelengths. For specific customization requirements, please contact LBTEK Technical Support.\u003c\/p\u003e\n\u003ch3\u003eUVFS, Nd:YAG Harmonic Beamsplitters, Ø12.7 mm\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCommonly used for separating Nd:YAG laser harmonics\u003c\/li\u003e\n\u003cli\u003eCan be used for optical path deflection\u003c\/li\u003e\n\u003cli\u003eHarmonic wavelengths: 266 nm, 355 nm, 532 nm, and 1064 nm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eØ12.7 mm Nd:YAG Harmonic Beamsplitter mounted on AMM3-05C\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516268789914,"sku":"HDM05-532R-1064T","price":157.13,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1UVFS_EF_BC_8CNdYAG_E8_B0_90_E6_B3_A2_E5_88_86_E5_85_89_E9_95_9C_EF_BC_8C_C3_9812.7_20mm-FhJn7LrR5793-9p0fadjjcPRRmZF_38a1b344-ecc1-47ef-b009-20fc15050711.jpg?v=1772650492"},{"product_id":"nd-yag-harmonic-beamsplitters-hdm05-c1","title":"UVFS, Nd:YAG Harmonic Beamsplitters, Ø12.7 mm HDM05-C1","description":"\u003ch2\u003eUVFS, Nd:YAG Harmonic Beamsplitters, Ø12.7 mm — Model HDM05-C1\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UVFS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront\/back surfaces coated with beamsplitter coating\/anti-reflective coatings respectively\u003c\/li\u003e\n\u003cli\u003eFour wavelength designs suitable for Nd:YAG laser applications\u003c\/li\u003e\n\u003cli\u003e30 arcmin wedge design on both surfaces to separate reflected and transmitted light\u003c\/li\u003e\n\u003cli\u003eAvailable in Ø12.7 mm and Ø25.4 mm diameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen using Nd:YAG lasers, it is often necessary to distinguish the fundamental frequency of the output laser from its harmonic components. LBTEK Nd:YAG Harmonic Beamsplitters utilize the transmission and reflection effects of different optical coatings on different wavelengths. The incident surface is coated with a beamsplitter coating, effectively separating the harmonics of the Nd:YAG laser. The output surface is coated with a V-type AR coating, minimizing reflections at the air-glass interface within a specific wavelength band (compared to the typical reflectivity of 4% on uncoated optical surfaces, the AR coating reduces the average reflectivity of each surface to below 0.5% within the specified wavelength band). Combined with a 30-arcmin wedge structure, this effectively reduces interference effects between reflected light from the incident and output surfaces. \nLBTEK offers Nd:YAG harmonic beamsplitters in four wavelength configurations and two sizes: Ø12.7 mm and Ø25.4 mm. LBTEK also offers a variety of customization services, including custom sizes and design wavelengths. For specific customization requirements, please contact LBTEK Technical Support.\u003c\/p\u003e\n\u003ch3\u003eUVFS, Nd:YAG Harmonic Beamsplitters, Ø12.7 mm\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCommonly used for separating Nd:YAG laser harmonics\u003c\/li\u003e\n\u003cli\u003eCan be used for optical path deflection\u003c\/li\u003e\n\u003cli\u003eHarmonic wavelengths: 266 nm, 355 nm, 532 nm, and 1064 nm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eØ12.7 mm Nd:YAG Harmonic Beamsplitter mounted on AMM3-05C\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516268920986,"sku":"HDM05-C1","price":157.13,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1UVFS_EF_BC_8CNdYAG_E8_B0_90_E6_B3_A2_E5_88_86_E5_85_89_E9_95_9C_EF_BC_8C_C3_9812.7_20mm-FhJn7LrR5793-9p0fadjjcPRRmZF_4b3fdf16-d578-46d8-b0c2-5f41b6f51a7d.jpg?v=1772650496"},{"product_id":"nd-yag-harmonic-beamsplitters-hdm10-c3","title":"UVFS, Nd:YAG Harmonic Beamsplitters, Ø25.4 mm HDM10-C3","description":"\u003ch2\u003eUVFS, Nd:YAG Harmonic Beamsplitters, Ø25.4 mm — Model HDM10-C3\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UVFS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront\/back surfaces coated with beamsplitter coating\/anti-reflective coatings respectively\u003c\/li\u003e\n\u003cli\u003eFour wavelength designs suitable for Nd:YAG laser applications\u003c\/li\u003e\n\u003cli\u003e30 arcmin wedge design on both surfaces to separate reflected and transmitted light\u003c\/li\u003e\n\u003cli\u003eAvailable in Ø12.7 mm and Ø25.4 mm diameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen using Nd:YAG lasers, it is often necessary to distinguish the fundamental frequency of the output laser from its harmonic components. LBTEK Nd:YAG Harmonic Beamsplitters utilize the transmission and reflection effects of different optical coatings on different wavelengths. The incident surface is coated with a beamsplitter coating, effectively separating the harmonics of the Nd:YAG laser. The output surface is coated with a V-type AR coating, minimizing reflections at the air-glass interface within a specific wavelength band (compared to the typical reflectivity of 4% on uncoated optical surfaces, the AR coating reduces the average reflectivity of each surface to below 0.5% within the specified wavelength band). Combined with a 30-arcmin wedge structure, this effectively reduces interference effects between reflected light from the incident and output surfaces. \nLBTEK offers Nd:YAG harmonic beamsplitters in four wavelength configurations and two sizes: Ø12.7 mm and Ø25.4 mm. LBTEK also offers a variety of customization services, including custom sizes and design wavelengths. For specific customization requirements, please contact LBTEK Technical Support.\u003c\/p\u003e\n\u003ch3\u003eUVFS, Nd:YAG Harmonic Beamsplitters, Ø25.4 mm\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCommonly used for separating Nd:YAG laser harmonics\u003c\/li\u003e\n\u003cli\u003eCan be used for optical path deflection\u003c\/li\u003e\n\u003cli\u003eHarmonic wavelengths: 355 nm, 532 nm, and 1064 nm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eØ25.4 mm Nd:YAG Harmonic Beamsplitter mounted on AMM-1B mirror mount\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516269183130,"sku":"HDM10-C3","price":324.47,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1UVFS_EF_BC_8CNdYAG_E8_B0_90_E6_B3_A2_E5_88_86_E5_85_89_E9_95_9C_EF_BC_8C_C3_9825.4_20mm-FsiYiPHWnXC_kkB69L12lHvhQbOG.jpg?v=1772650501"},{"product_id":"nd-yag-harmonic-beamsplitters-hdm10-c2","title":"UVFS, Nd:YAG Harmonic Beamsplitters, Ø25.4 mm HDM10-C2","description":"\u003ch2\u003eUVFS, Nd:YAG Harmonic Beamsplitters, Ø25.4 mm — Model HDM10-C2\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UVFS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront\/back surfaces coated with beamsplitter coating\/anti-reflective coatings respectively\u003c\/li\u003e\n\u003cli\u003eFour wavelength designs suitable for Nd:YAG laser applications\u003c\/li\u003e\n\u003cli\u003e30 arcmin wedge design on both surfaces to separate reflected and transmitted light\u003c\/li\u003e\n\u003cli\u003eAvailable in Ø12.7 mm and Ø25.4 mm diameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen using Nd:YAG lasers, it is often necessary to distinguish the fundamental frequency of the output laser from its harmonic components. LBTEK Nd:YAG Harmonic Beamsplitters utilize the transmission and reflection effects of different optical coatings on different wavelengths. The incident surface is coated with a beamsplitter coating, effectively separating the harmonics of the Nd:YAG laser. The output surface is coated with a V-type AR coating, minimizing reflections at the air-glass interface within a specific wavelength band (compared to the typical reflectivity of 4% on uncoated optical surfaces, the AR coating reduces the average reflectivity of each surface to below 0.5% within the specified wavelength band). Combined with a 30-arcmin wedge structure, this effectively reduces interference effects between reflected light from the incident and output surfaces. \nLBTEK offers Nd:YAG harmonic beamsplitters in four wavelength configurations and two sizes: Ø12.7 mm and Ø25.4 mm. LBTEK also offers a variety of customization services, including custom sizes and design wavelengths. For specific customization requirements, please contact LBTEK Technical Support.\u003c\/p\u003e\n\u003ch3\u003eUVFS, Nd:YAG Harmonic Beamsplitters, Ø25.4 mm\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCommonly used for separating Nd:YAG laser harmonics\u003c\/li\u003e\n\u003cli\u003eCan be used for optical path deflection\u003c\/li\u003e\n\u003cli\u003eHarmonic wavelengths: 355 nm, 532 nm, and 1064 nm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eØ25.4 mm Nd:YAG Harmonic Beamsplitter mounted on AMM-1B mirror mount\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516269346970,"sku":"HDM10-C2","price":324.47,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1UVFS_EF_BC_8CNdYAG_E8_B0_90_E6_B3_A2_E5_88_86_E5_85_89_E9_95_9C_EF_BC_8C_C3_9825.4_20mm-FsiYiPHWnXC_kkB69L12lHvhQbOG_bc225bc0-beec-4e6d-b212-cfd9374925ab.jpg?v=1772650506"},{"product_id":"nd-yag-harmonic-beamsplitters-hdm10-c1","title":"UVFS, Nd:YAG Harmonic Beamsplitters, Ø25.4 mm HDM10-C1","description":"\u003ch2\u003eUVFS, Nd:YAG Harmonic Beamsplitters, Ø25.4 mm — Model HDM10-C1\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UVFS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront\/back surfaces coated with beamsplitter coating\/anti-reflective coatings respectively\u003c\/li\u003e\n\u003cli\u003eFour wavelength designs suitable for Nd:YAG laser applications\u003c\/li\u003e\n\u003cli\u003e30 arcmin wedge design on both surfaces to separate reflected and transmitted light\u003c\/li\u003e\n\u003cli\u003eAvailable in Ø12.7 mm and Ø25.4 mm diameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen using Nd:YAG lasers, it is often necessary to distinguish the fundamental frequency of the output laser from its harmonic components. LBTEK Nd:YAG Harmonic Beamsplitters utilize the transmission and reflection effects of different optical coatings on different wavelengths. The incident surface is coated with a beamsplitter coating, effectively separating the harmonics of the Nd:YAG laser. The output surface is coated with a V-type AR coating, minimizing reflections at the air-glass interface within a specific wavelength band (compared to the typical reflectivity of 4% on uncoated optical surfaces, the AR coating reduces the average reflectivity of each surface to below 0.5% within the specified wavelength band). Combined with a 30-arcmin wedge structure, this effectively reduces interference effects between reflected light from the incident and output surfaces. \nLBTEK offers Nd:YAG harmonic beamsplitters in four wavelength configurations and two sizes: Ø12.7 mm and Ø25.4 mm. LBTEK also offers a variety of customization services, including custom sizes and design wavelengths. For specific customization requirements, please contact LBTEK Technical Support.\u003c\/p\u003e\n\u003ch3\u003eUVFS, Nd:YAG Harmonic Beamsplitters, Ø25.4 mm\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCommonly used for separating Nd:YAG laser harmonics\u003c\/li\u003e\n\u003cli\u003eCan be used for optical path deflection\u003c\/li\u003e\n\u003cli\u003eHarmonic wavelengths: 355 nm, 532 nm, and 1064 nm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eØ25.4 mm Nd:YAG Harmonic Beamsplitter mounted on AMM-1B mirror mount\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516269445274,"sku":"HDM10-C1","price":330.42,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1UVFS_EF_BC_8CNdYAG_E8_B0_90_E6_B3_A2_E5_88_86_E5_85_89_E9_95_9C_EF_BC_8C_C3_9825.4_20mm-FsiYiPHWnXC_kkB69L12lHvhQbOG_df33425f-395b-4f78-aee2-8df55eca9663.jpg?v=1772650510"},{"product_id":"nd-yag-harmonic-beamsplitters-hdm10-532r-1064t-sp","title":"UVFS, Nd:YAG Harmonic Beamsplitters, Ø25.4 mm HDM10-532R-1064T-SP","description":"\u003ch2\u003eUVFS, Nd:YAG Harmonic Beamsplitters, Ø25.4 mm — Model HDM10-532R-1064T-SP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UVFS.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFront\/back surfaces coated with beamsplitter coating\/anti-reflective coatings respectively\u003c\/li\u003e\n\u003cli\u003eFour wavelength designs suitable for Nd:YAG laser applications\u003c\/li\u003e\n\u003cli\u003e30 arcmin wedge design on both surfaces to separate reflected and transmitted light\u003c\/li\u003e\n\u003cli\u003eAvailable in Ø12.7 mm and Ø25.4 mm diameters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen using Nd:YAG lasers, it is often necessary to distinguish the fundamental frequency of the output laser from its harmonic components. LBTEK Nd:YAG Harmonic Beamsplitters utilize the transmission and reflection effects of different optical coatings on different wavelengths. The incident surface is coated with a beamsplitter coating, effectively separating the harmonics of the Nd:YAG laser. The output surface is coated with a V-type AR coating, minimizing reflections at the air-glass interface within a specific wavelength band (compared to the typical reflectivity of 4% on uncoated optical surfaces, the AR coating reduces the average reflectivity of each surface to below 0.5% within the specified wavelength band). Combined with a 30-arcmin wedge structure, this effectively reduces interference effects between reflected light from the incident and output surfaces. \nLBTEK offers Nd:YAG harmonic beamsplitters in four wavelength configurations and two sizes: Ø12.7 mm and Ø25.4 mm. LBTEK also offers a variety of customization services, including custom sizes and design wavelengths. For specific customization requirements, please contact LBTEK Technical Support.\u003c\/p\u003e\n\u003ch3\u003eUVFS, Nd:YAG Harmonic Beamsplitters, Ø25.4 mm\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCommonly used for separating Nd:YAG laser harmonics\u003c\/li\u003e\n\u003cli\u003eCan be used for optical path deflection\u003c\/li\u003e\n\u003cli\u003eHarmonic wavelengths: 355 nm, 532 nm, and 1064 nm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eØ25.4 mm Nd:YAG Harmonic Beamsplitter mounted on AMM-1B mirror mount\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516269510810,"sku":"HDM10-532R-1064T-SP","price":334.69,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1UVFS_EF_BC_8CNdYAG_E8_B0_90_E6_B3_A2_E5_88_86_E5_85_89_E9_95_9C_EF_BC_8C_C3_9825.4_20mm-FsiYiPHWnXC_kkB69L12lHvhQbOG_5f3b8c0f-ed83-4009-90be-0b160fa40f39.jpg?v=1772650515"},{"product_id":"dichroic-longpass-mirrors-dm05-1800lp","title":"Longpass Dichroic Mirrors, Half-inch Round DM05-1800LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Half-inch Round — Model DM05-1800LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Half-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø12.7 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516269609114,"sku":"DM05-1800LP","price":213.09,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E5_8D_8A_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FgVhROIJ5XZjdR4FdEd4NA7n2MWL.jpg?v=1772650519"},{"product_id":"dichroic-longpass-mirrors-dm05-1500lp","title":"Longpass Dichroic Mirrors, Half-inch Round DM05-1500LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Half-inch Round — Model DM05-1500LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Half-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø12.7 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516269674650,"sku":"DM05-1500LP","price":213.09,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E5_8D_8A_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FgVhROIJ5XZjdR4FdEd4NA7n2MWL_618afc8b-c127-49e5-b72a-85f03545c07b.jpg?v=1772650524"},{"product_id":"dichroic-longpass-mirrors-dm05-1180lp","title":"Longpass Dichroic Mirrors, Half-inch Round DM05-1180LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Half-inch Round — Model DM05-1180LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Half-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø12.7 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516269805722,"sku":"DM05-1180LP","price":213.09,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E5_8D_8A_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FgVhROIJ5XZjdR4FdEd4NA7n2MWL_d42dc61b-ef4d-46ef-b61c-76ba7d364e3e.jpg?v=1772650529"},{"product_id":"dichroic-longpass-mirrors-dm05-1000lp","title":"Longpass Dichroic Mirrors, Half-inch Round DM05-1000LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Half-inch Round — Model DM05-1000LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Half-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø12.7 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516269904026,"sku":"DM05-1000LP","price":213.09,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E5_8D_8A_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FgVhROIJ5XZjdR4FdEd4NA7n2MWL_8ed4d8d6-38ba-4a5d-a82c-dfdae8b0ccc5.jpg?v=1772650534"},{"product_id":"dichroic-longpass-mirrors-dm05-950lp","title":"Longpass Dichroic Mirrors, Half-inch Round DM05-950LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Half-inch Round — Model DM05-950LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Half-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø12.7 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516269936794,"sku":"DM05-950LP","price":213.09,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E5_8D_8A_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FgVhROIJ5XZjdR4FdEd4NA7n2MWL_a4a919b5-a139-4f66-b38d-44f3d276b326.jpg?v=1772650538"},{"product_id":"dichroic-longpass-mirrors-dm05-805lp","title":"Longpass Dichroic Mirrors, Half-inch Round DM05-805LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Half-inch Round — Model DM05-805LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Half-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø12.7 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516270035098,"sku":"DM05-805LP","price":213.09,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E5_8D_8A_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FgVhROIJ5XZjdR4FdEd4NA7n2MWL_a9a40f6a-fd7e-4985-a1e8-b4f7e4c2e6d5.jpg?v=1772650542"},{"product_id":"dichroic-longpass-mirrors-dm05-650lp","title":"Longpass Dichroic Mirrors, Half-inch Round DM05-650LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Half-inch Round — Model DM05-650LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Half-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø12.7 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516272525466,"sku":"DM05-650LP","price":213.09,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E5_8D_8A_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FgVhROIJ5XZjdR4FdEd4NA7n2MWL_cf03d2a8-3d9f-43cd-9a66-c4effa407715.jpg?v=1772650547"},{"product_id":"dichroic-longpass-mirrors-dm05-638lp","title":"Longpass Dichroic Mirrors, Half-inch Round DM05-638LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Half-inch Round — Model DM05-638LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Half-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø12.7 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516272722074,"sku":"DM05-638LP","price":166.23,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E5_8D_8A_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FgVhROIJ5XZjdR4FdEd4NA7n2MWL_05298eb3-38c4-4a96-959f-9acc14f33f02.jpg?v=1772650553"},{"product_id":"dichroic-longpass-mirrors-dm05-605lp","title":"Longpass Dichroic Mirrors, Half-inch Round DM05-605LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Half-inch Round — Model DM05-605LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Half-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø12.7 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516272853146,"sku":"DM05-605LP","price":166.23,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E5_8D_8A_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FgVhROIJ5XZjdR4FdEd4NA7n2MWL_370921ab-10e7-4625-a7ec-28c4a2a7e620.jpg?v=1772650557"},{"product_id":"dichroic-longpass-mirrors-dm05-550lp","title":"Longpass Dichroic Mirrors, Half-inch Round DM05-550LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Half-inch Round — Model DM05-550LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Half-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø12.7 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516272918682,"sku":"DM05-550LP","price":164.57,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E5_8D_8A_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FgVhROIJ5XZjdR4FdEd4NA7n2MWL_e3349e7c-d8ba-46cf-becb-5847f15733b0.jpg?v=1772650562"},{"product_id":"dichroic-longpass-mirrors-dm05-505lp","title":"Longpass Dichroic Mirrors, Half-inch Round DM05-505LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Half-inch Round — Model DM05-505LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Half-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø12.7 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516273016986,"sku":"DM05-505LP","price":164.57,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E5_8D_8A_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FgVhROIJ5XZjdR4FdEd4NA7n2MWL_3b9b4eb4-7e39-486d-8ec5-1da5a84b7d15.jpg?v=1772650567"},{"product_id":"dichroic-longpass-mirrors-dm05-490lp","title":"Longpass Dichroic Mirrors, Half-inch Round DM05-490LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Half-inch Round — Model DM05-490LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Half-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø12.7 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516273115290,"sku":"DM05-490LP","price":164.57,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E5_8D_8A_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FgVhROIJ5XZjdR4FdEd4NA7n2MWL_c1771472-33bc-486b-b421-1467c0a1bb7c.jpg?v=1772650572"},{"product_id":"dichroic-longpass-mirrors-dm05-425lp","title":"Longpass Dichroic Mirrors, Half-inch Round DM05-425LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Half-inch Round — Model DM05-425LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ12.7 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Half-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø12.7 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516273180826,"sku":"DM05-425LP","price":164.57,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/1-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E5_8D_8A_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FgVhROIJ5XZjdR4FdEd4NA7n2MWL_6768976e-7734-4644-b680-4f903b25d73a.jpg?v=1772650577"},{"product_id":"dichroic-longpass-mirrors-dm10-638lp","title":"Longpass Dichroic Mirrors, 1-inch Round DM10-638LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 1-inch Round — Model DM10-638LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 1-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø25.4 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516273246362,"sku":"DM10-638LP","price":260.51,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C1_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FpK0a25tYrEBXk5kUZEi_dL0Hp5d.jpg?v=1772650582"},{"product_id":"dichroic-longpass-mirrors-dm10-505lp","title":"Longpass Dichroic Mirrors, 1-inch Round DM10-505LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 1-inch Round — Model DM10-505LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 1-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø25.4 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516273311898,"sku":"DM10-505LP","price":260.51,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C1_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FpK0a25tYrEBXk5kUZEi_dL0Hp5d_6e5faebe-b82c-4fb5-83ed-39c577bbb0d5.jpg?v=1772650586"},{"product_id":"dichroic-longpass-mirrors-dm10-425lp","title":"Longpass Dichroic Mirrors, 1-inch Round DM10-425LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 1-inch Round — Model DM10-425LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 1-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø25.4 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516273475738,"sku":"DM10-425LP","price":260.51,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C1_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FpK0a25tYrEBXk5kUZEi_dL0Hp5d_d7196b7f-3ead-4e64-a7fb-26fd2a7fce0a.jpg?v=1772650591"},{"product_id":"dichroic-longpass-mirrors-dm10-805lp","title":"Longpass Dichroic Mirrors, 1-inch Round DM10-805LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 1-inch Round — Model DM10-805LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 1-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø25.4 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516273541274,"sku":"DM10-805LP","price":307.74,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C1_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FpK0a25tYrEBXk5kUZEi_dL0Hp5d_3cd684d5-2570-41fa-81f3-bca986b7e71c.jpg?v=1772650596"},{"product_id":"dichroic-longpass-mirrors-dm10-1800lp","title":"Longpass Dichroic Mirrors, 1-inch Round DM10-1800LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 1-inch Round — Model DM10-1800LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 1-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø25.4 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516620685466,"sku":"DM10-1800LP","price":329.31,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C1_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FpK0a25tYrEBXk5kUZEi_dL0Hp5d_4436d716-f033-4273-8eaa-623e33914daa.jpg?v=1772656083"},{"product_id":"dichroic-longpass-mirrors-dm10-1500lp","title":"Longpass Dichroic Mirrors, 1-inch Round DM10-1500LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 1-inch Round — Model DM10-1500LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 1-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø25.4 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516621045914,"sku":"DM10-1500LP","price":329.31,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C1_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FpK0a25tYrEBXk5kUZEi_dL0Hp5d_9d964e9f-73ff-4aad-a76f-c9d8357e4057.jpg?v=1772656088"},{"product_id":"dichroic-longpass-mirrors-dm10-1180lp","title":"Longpass Dichroic Mirrors, 1-inch Round DM10-1180LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 1-inch Round — Model DM10-1180LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 1-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø25.4 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516621176986,"sku":"DM10-1180LP","price":297.33,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C1_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FpK0a25tYrEBXk5kUZEi_dL0Hp5d_234364ca-f08a-4dc1-9ead-84c977d75610.jpg?v=1772656092"},{"product_id":"dichroic-longpass-mirrors-dm10-605lp","title":"Longpass Dichroic Mirrors, 1-inch Round DM10-605LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 1-inch Round — Model DM10-605LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 1-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø25.4 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516621242522,"sku":"DM10-605LP","price":260.51,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C1_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FpK0a25tYrEBXk5kUZEi_dL0Hp5d_e2c84bd8-7061-4cd7-b658-3a95c9873f1e.jpg?v=1772656097"},{"product_id":"dichroic-longpass-mirrors-dm10-550lp","title":"Longpass Dichroic Mirrors, 1-inch Round DM10-550LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 1-inch Round — Model DM10-550LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 1-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø25.4 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516622946458,"sku":"DM10-550LP","price":294.35,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C1_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FpK0a25tYrEBXk5kUZEi_dL0Hp5d_ebda0a53-11b8-4653-a400-8952f35e39bd.jpg?v=1772656101"},{"product_id":"dichroic-longpass-mirrors-dm10-490lp","title":"Longpass Dichroic Mirrors, 1-inch Round DM10-490LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 1-inch Round — Model DM10-490LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 1-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø25.4 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516623175834,"sku":"DM10-490LP","price":260.51,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C1_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FpK0a25tYrEBXk5kUZEi_dL0Hp5d_9c041959-affd-4b34-b189-f6c0f91a773e.jpg?v=1772656106"},{"product_id":"dichroic-longpass-mirrors-dm10-1000lp","title":"Longpass Dichroic Mirrors, 1-inch Round DM10-1000LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 1-inch Round — Model DM10-1000LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 1-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø25.4 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516623274138,"sku":"DM10-1000LP","price":345.31,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C1_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FpK0a25tYrEBXk5kUZEi_dL0Hp5d_b54e1bae-7bc8-412b-aafa-de952f35336e.jpg?v=1772656110"},{"product_id":"dichroic-longpass-mirrors-dm10-950lp","title":"Longpass Dichroic Mirrors, 1-inch Round DM10-950LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 1-inch Round — Model DM10-950LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 1-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø25.4 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516623372442,"sku":"DM10-950LP","price":329.31,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C1_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FpK0a25tYrEBXk5kUZEi_dL0Hp5d_d9c07046-41cf-42cf-902f-fbd5c4dffc2d.jpg?v=1772656115"},{"product_id":"dichroic-longpass-mirrors-dm10-650lp","title":"Longpass Dichroic Mirrors, 1-inch Round DM10-650LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 1-inch Round — Model DM10-650LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ25.4 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 1-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø25.4 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516623470746,"sku":"DM10-650LP","price":329.31,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/2-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C1_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FpK0a25tYrEBXk5kUZEi_dL0Hp5d_b1bab699-622c-4b22-a018-6022b25223a7.jpg?v=1772656119"},{"product_id":"dichroic-longpass-mirrors-dm20-425lp","title":"Longpass Dichroic Mirrors, 2-inch Round DM20-425LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 2-inch Round — Model DM20-425LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ50.8 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 2-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø50.8 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516623569050,"sku":"DM20-425LP","price":471.37,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/3-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C2_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-Fno8uoVZFLJ6RFKzOUOfXn6hVJEt.jpg?v=1772656124"},{"product_id":"dichroic-longpass-mirrors-dm20-490lp","title":"Longpass Dichroic Mirrors, 2-inch Round DM20-490LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 2-inch Round — Model DM20-490LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ50.8 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 2-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø50.8 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516623732890,"sku":"DM20-490LP","price":471.37,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/3-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C2_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-Fno8uoVZFLJ6RFKzOUOfXn6hVJEt_a55d3a21-8d75-4025-8900-43559d6bc26b.jpg?v=1772656129"},{"product_id":"dichroic-longpass-mirrors-dm20-505lp","title":"Longpass Dichroic Mirrors, 2-inch Round DM20-505LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 2-inch Round — Model DM20-505LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ50.8 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 2-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø50.8 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516623863962,"sku":"DM20-505LP","price":471.37,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/3-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C2_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-Fno8uoVZFLJ6RFKzOUOfXn6hVJEt_a92ec87a-e8f7-41d6-bb78-1ab7427c4434.jpg?v=1772656133"},{"product_id":"dichroic-longpass-mirrors-dm20-550lp","title":"Longpass Dichroic Mirrors, 2-inch Round DM20-550LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 2-inch Round — Model DM20-550LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ50.8 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 2-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø50.8 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516623929498,"sku":"DM20-550LP","price":471.37,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/3-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C2_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-Fno8uoVZFLJ6RFKzOUOfXn6hVJEt_3f04471d-cedf-4251-83c7-f581a70ade2a.jpg?v=1772656138"},{"product_id":"dichroic-longpass-mirrors-dm20-638lp","title":"Longpass Dichroic Mirrors, 2-inch Round DM20-638LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 2-inch Round — Model DM20-638LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ50.8 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 2-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø50.8 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47516624060570,"sku":"DM20-638LP","price":471.37,"currency_code":"SGD","in_stock":true}]},{"product_id":"dichroic-longpass-mirrors-dm20-605lp","title":"Longpass Dichroic Mirrors, 2-inch Round DM20-605LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 2-inch Round — Model DM20-605LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ50.8 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 2-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø50.8 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47517338108058,"sku":"DM20-605LP","price":471.37,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/3-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C2_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-Fno8uoVZFLJ6RFKzOUOfXn6hVJEt_b09f606c-298d-4534-bb9f-a849e0cc0eff.jpg?v=1772660222"},{"product_id":"dichroic-longpass-mirrors-dm20-650lp","title":"Longpass Dichroic Mirrors, 2-inch Round DM20-650LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 2-inch Round — Model DM20-650LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ50.8 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 2-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø50.8 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47517346562202,"sku":"DM20-650LP","price":621.43,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/3-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C2_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-Fno8uoVZFLJ6RFKzOUOfXn6hVJEt_c49d7025-79de-420a-9f8f-a81f121bf4ba.jpg?v=1772660226"},{"product_id":"dichroic-longpass-mirrors-dm20-805lp","title":"Longpass Dichroic Mirrors, 2-inch Round DM20-805LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 2-inch Round — Model DM20-805LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ50.8 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 2-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø50.8 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47517352034458,"sku":"DM20-805LP","price":621.43,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/3-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C2_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-Fno8uoVZFLJ6RFKzOUOfXn6hVJEt_eadb638d-cd57-46a6-9698-f83dd57d745a.jpg?v=1772660231"},{"product_id":"dichroic-longpass-mirrors-dm20-950lp","title":"Longpass Dichroic Mirrors, 2-inch Round DM20-950LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 2-inch Round — Model DM20-950LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ50.8 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 2-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø50.8 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47517357539482,"sku":"DM20-950LP","price":621.43,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/3-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C2_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-Fno8uoVZFLJ6RFKzOUOfXn6hVJEt_eedbb3ff-0cf7-42a7-9c7b-f771084f6d71.jpg?v=1772660236"},{"product_id":"dichroic-longpass-mirrors-dm20-1000lp","title":"Longpass Dichroic Mirrors, 2-inch Round DM20-1000LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 2-inch Round — Model DM20-1000LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ50.8 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 2-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø50.8 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47517363142810,"sku":"DM20-1000LP","price":621.43,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/3-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C2_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-Fno8uoVZFLJ6RFKzOUOfXn6hVJEt_581ff36d-fffc-466d-903b-8059b4e0a710.jpg?v=1772660241"},{"product_id":"dichroic-longpass-mirrors-dm20-1180lp","title":"Longpass Dichroic Mirrors, 2-inch Round DM20-1180LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 2-inch Round — Model DM20-1180LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ50.8 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 2-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø50.8 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47517368680602,"sku":"DM20-1180LP","price":627.56,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/3-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C2_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-Fno8uoVZFLJ6RFKzOUOfXn6hVJEt_1045a9bb-4e59-43bd-a8c8-8e11d0c1e8ca.jpg?v=1772660245"},{"product_id":"dichroic-longpass-mirrors-dm20-1500lp","title":"Longpass Dichroic Mirrors, 2-inch Round DM20-1500LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 2-inch Round — Model DM20-1500LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ50.8 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 2-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø50.8 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47517379592346,"sku":"DM20-1500LP","price":621.43,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/3-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C2_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-Fno8uoVZFLJ6RFKzOUOfXn6hVJEt_9adbbf12-edba-4723-97ad-3cbbc4f92d12.jpg?v=1772660250"},{"product_id":"dichroic-longpass-mirrors-dm20-1800lp","title":"Longpass Dichroic Mirrors, 2-inch Round DM20-1800LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, 2-inch Round — Model DM20-1800LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eØ50.8 mm, substrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, 2-inch Round\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: Ø50.8 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47517385130138,"sku":"DM20-1800LP","price":621.43,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/3-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C2_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-Fno8uoVZFLJ6RFKzOUOfXn6hVJEt_a9ba14f3-79f2-4131-8a0e-2d8c0ccbd4b8.jpg?v=1772660255"},{"product_id":"dichroic-longpass-mirrors-dmr-425lp","title":"Longpass Dichroic Mirrors, Rectangular DMR-425LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Rectangular — Model DMR-425LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSubstrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Rectangular\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: 36.0 mm×25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47517393059994,"sku":"DMR-425LP","price":358.5,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/4-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E7_9F_A9_E5_BD_A2-FkIUw2BgtvwTZR17tLNISFkiGkDb.jpg?v=1772660259"},{"product_id":"dichroic-longpass-mirrors-dmr-490lp","title":"Longpass Dichroic Mirrors, Rectangular DMR-490LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Rectangular — Model DMR-490LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSubstrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Rectangular\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: 36.0 mm×25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47517401546906,"sku":"DMR-490LP","price":358.5,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/4-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E7_9F_A9_E5_BD_A2-FkIUw2BgtvwTZR17tLNISFkiGkDb_418e1f62-754d-4fbe-bc9f-c1b9219fc3ce.jpg?v=1772660264"},{"product_id":"dichroic-longpass-mirrors-dmr-505lp","title":"Longpass Dichroic Mirrors, Rectangular DMR-505LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Rectangular — Model DMR-505LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSubstrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Rectangular\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: 36.0 mm×25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47517412425882,"sku":"DMR-505LP","price":358.5,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/4-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E7_9F_A9_E5_BD_A2-FkIUw2BgtvwTZR17tLNISFkiGkDb_51b0b717-cfa5-4565-8834-a1345d6776e8.jpg?v=1772660269"},{"product_id":"dichroic-longpass-mirrors-dmr-550lp","title":"Longpass Dichroic Mirrors, Rectangular DMR-550LP","description":"\u003ch2\u003eLongpass Dichroic Mirrors, Rectangular — Model DMR-550LP\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eSubstrate UV Fused Silica.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UV Fused Silica\u003c\/li\u003e\n\u003cli\u003eFour sizes available: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm × 25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK Dichroic Mirrors can separate light beams based on wavelength. Longpass Dichroic Mirrors transmit light above the cut-on wavelength while reflecting light below it, featuring high transmission and high reflection characteristics. Our dichroic mirrors are available in 13 cut-off wavelength options: 425 nm, 490 nm, 505 nm, 550 nm, 605 nm, 638 nm, 650 nm, 805 nm, 950 nm, 1000 nm, 1180 nm, 1500 nm, and 1800 nm, with average transmission and reflection rates exceeding 90% within the specified wavelength ranges. LBTEK offers four size options: Ø12.7 mm, Ø25.4 mm, Ø50.8 mm, and 36.0 mm×25.0 mm. Our dichroic mirrorsrs have a filter coating on one surface and an AR coating on the other. The arrow points to the filter-coated surface, and incident light is directed from this side. LBTEK also offers shortpass dichroic mirrors, which transmit light below the cut-off wavelength while reflecting light above it. In addition to standard dichroic mirrors, LBTEK also offers a variety of custom dichroic mirrors. Please contact LBTEK Technical Support for special requirements.\u003c\/p\u003e\n\u003ch3\u003eLongpass Dichroic Mirrors, Rectangular\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSubstrate Material: UVFS\u003c\/li\u003e\n\u003cli\u003eSize: 36.0 mm×25.0 mm\u003c\/li\u003e\n\u003cli\u003eApplication: Filtering and beam splitting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLBTEK dichroic mirrors can separate light beams based on wavelength. Longpass dichroic mirrors transmit light beams above the cut-on wavelength while reflecting those below the cut-on wavelength, featuring high transmission and high reflection characteristics. Our dichroic mirrors offer various cut-off wavelength options, achieving average transmission and reflection rates of over 90% within specified wavelength ranges. One surface of the dichroic mirror is coated with a filter coating, while the other side has an anti-reflection coating, with the arrow indicating the surface coated with the filter coating.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47517417930906,"sku":"DMR-550LP","price":348.08,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/4-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E7_9F_A9_E5_BD_A2-FkIUw2BgtvwTZR17tLNISFkiGkDb_cbd57954-c654-4ab2-9b7c-2143e9a75280.jpg?v=1772660273"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/collections\/1-1_E9_95_BF_E6_B3_A2_E9_80_9A_E4_BA_8C_E5_90_91_E8_89_B2_E9_95_9C_EF_BC_8C_E5_8D_8A_E8_8B_B1_E5_AF_B8_E5_9C_86_E5_BD_A2-FgVhROIJ5XZjdR4FdEd4NA7n2MWL_8ed4d8d6-38ba-4a5d-a82c-dfdae8b0c.jpg?v=1777788429","url":"https:\/\/waveqvanta.com\/collections\/lbtek-optics-dichroic-mirrors.oembed","provider":"WaveQuanta","version":"1.0","type":"link"}