Accessories and extensions for the main bracket

The components in this product set integrate LBTEK's lens sleeve system, cage assembly system, and other optomechanical components with our self-assembled microscope platform. We offer various types of mounting arms that can align lens sleeves and/or cage systems along the optical axis, which is 196.5 mm from the edge of the guide rail on the self-assembled microscope main body bracket. Some mounting arms can be directly attached to the vertical guide rails to provide structural support for these systems, while others can be connected to manual or motorized modules to achieve a 25.4 mm travel along the optical axis. Additionally, we manufacture top breadboards with optical ports located at the center of the D1N male dovetail blocks. These breadboards feature an array of M6 x 1.0 threaded holes and can be mounted onto the D1N female dovetail slot on the epi-illumination arm of the Cerna microscope main body bracket, facilitating the construction of custom optomechanical setups. We also provide manual dual-port mounts capable of selecting and combining optical paths. Our 95 mm rail mounting platform allows user-designed modules to be installed on both sides of the vertical guide rails. Modules for epi-illuminators are available below, enabling the connection of SM1 lens sleeves and 30 mm cage systems to fluorescence filter cubes. Eyepiece adapters and dovetail adapters are also shown below, which connect various components of the self-assembled microscope to lens sleeves and cage systems.