{"title":"0.5-inch vacuum-compatible stainless steel optical mount","description":"The LBTEK 0.5-inch vacuum series optical mount is designed for mounting optical components with a diameter of 12.7 mm and can be installed in either left-handed or right-handed configurations. The optical component is secured using flexure spring plate and fixing screws, or alternatively with a retaining ring. The M4×0.2 precision adjuster provides the mount with an angular adjustment range of ±5°. The VSS series features a unique vacuum structural design. At an ambient temperature of 23°C, it can be directly used in a vacuum environment of 10^(-6) Torr right after unpacking. For applications in vacuum environments ranging from 10^(-6) Torr to 10^(-9) Torr, it is recommended to bake the product at 110°C for 5 hours before installation to remove any attached grease or moisture. Note: All VSS products are pre-baked before leaving the factory, which may result in varying degrees of light yellow discoloration. This appearance is normal and does not affect vacuum performance. Avoid contact with greasy or moist objects when using this series of products.","products":[{"product_id":"0-5-inch-vacuum-compatible-stainless-steel-optical-mount-vss-mt-am05t","title":"0.5-inch vacuum-compatible stainless steel optical mount VSS-MT-AM05T","description":"\u003cp\u003e\u003cstrong\u003e0.5-inch vacuum-compatible stainless steel optical mount VSS-MT-AM05T\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #16a34a;\"\u003e✔ In Stock — Ships Today\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-desc\"\u003e\u003cp\u003eThe LBTEK 0.5-inch stainless steel mount is designed for mounting optical components with a diameter of 12.7 mm, featuring three knobless M4×0.2 precision adjusters. Two optical component clamping methods are available: the VSS-MT-AM05 uses flexible spring leaves and fixing screws to secure the optical component, with a minimum component thickness of 2 mm; the VSS-MT-AM05T employs retaining rings to directly fix the optical component, and two stainless steel retaining rings are included with the purchase. The maximum thickness for ring-fixed optical components should not exceed 6.6 mm. The three knobless M4×0.2 precision adjusters allow for pitch and yaw adjustments of the optical component using a hex key. The optical mount features M4 countersunk mounting holes on the side. Purchasing the LBTEK vacuum-compatible mount includes vacuum-compatible ultra-thin hex screws (with vent holes) and a hex key.\u003c\/p\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-tips\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor mounting optical components with a diameter of 12.7mm\u003c\/li\u003e\n  \u003cli\u003eThree knobless M4×0.2 precision adjusters\u003c\/li\u003e\n  \u003cli\u003eAdjustable angle range ±5°\u003c\/li\u003e\n  \u003cli\u003eTwo optical component mounting methods available\u003c\/li\u003e\n  \u003cli\u003eAdjustment sensitivity: 0.65°\/turn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-explain\"\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eThe 0.5-inch vacuum stainless steel mount is commonly used for installing optical components such as mirrors.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47499591352474,"sku":"VSS-MT-AM05T","price":337.16,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/E7_BB_84_E5_90_88_E5_9B_BE-FkP4se0ZyOTKmhWM3ODslj1YNQQg.jpg?v=1772282018"},{"product_id":"0-5-inch-vacuum-compatible-stainless-steel-optical-mount-vss-mt-am05","title":"0.5-inch vacuum-compatible stainless steel optical mount VSS-MT-AM05","description":"\u003cp\u003e\u003cstrong\u003e0.5-inch vacuum-compatible stainless steel optical mount VSS-MT-AM05\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #16a34a;\"\u003e✔ In Stock — Ships Today\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-desc\"\u003e\u003cp\u003eThe LBTEK 0.5-inch stainless steel mount is designed for mounting optical components with a diameter of 12.7 mm, featuring three knobless M4×0.2 precision adjusters. Two optical component clamping methods are available: the VSS-MT-AM05 uses flexible spring leaves and fixing screws to secure the optical component, with a minimum component thickness of 2 mm; the VSS-MT-AM05T employs retaining rings to directly fix the optical component, and two stainless steel retaining rings are included with the purchase. The maximum thickness for ring-fixed optical components should not exceed 6.6 mm. The three knobless M4×0.2 precision adjusters allow for pitch and yaw adjustments of the optical component using a hex key. The optical mount features M4 countersunk mounting holes on the side. Purchasing the LBTEK vacuum-compatible mount includes vacuum-compatible ultra-thin hex screws (with vent holes) and a hex key.\u003c\/p\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-tips\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor mounting optical components with a diameter of 12.7mm\u003c\/li\u003e\n  \u003cli\u003eThree knobless M4×0.2 precision adjusters\u003c\/li\u003e\n  \u003cli\u003eAdjustable angle range ±5°\u003c\/li\u003e\n  \u003cli\u003eTwo optical component mounting methods available\u003c\/li\u003e\n  \u003cli\u003eAdjustment sensitivity: 0.65°\/turn\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-explain\"\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eThe 0.5-inch vacuum stainless steel mount is commonly used for installing optical components such as mirrors.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47499591483546,"sku":"VSS-MT-AM05","price":285.61,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/E7_BB_84_E5_90_88_E5_9B_BE-FkP4se0ZyOTKmhWM3ODslj1YNQQg_2f8b8bf4-a410-4176-b940-3dad42c117aa.jpg?v=1772282018"},{"product_id":"0-5-inch-vacuum-compatible-stainless-steel-optical-mount-vss-mt-am05t1","title":"0.5-inch vacuum-compatible stainless steel optical mount VSS-MT-AM05T1","description":"\u003cp\u003eThe 0.5-inch vacuum-compatible stainless steel optical mount VSS-MT-AM05T1 from WaveQuanta is a high-performance Mounts Holders designed for precision optical alignment and component mounting. Available from stock for immediate shipment. Sourced directly from WaveQuanta, this product meets the high standards required for scientific research and precision photonics applications.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #16a34a;\"\u003e✔ In Stock — Ships Today\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-desc\"\u003e\u003cp\u003eLBTEK 0.5-inch Vacuum Stainless Steel Mount for mounting 12.7 mm diameter optical components, with 2 knobless M4×0.2 precision adjusters. Two optical component fixing methods are available: VSS-MT-AM05S1 uses flexible spring plates and a set screw to secure the optical component, with a minimum component thickness of 2 mm; VSS-MT-AM05T1 uses a retaining ring to directly secure the optical component. The purchase of the mount includes 2 stainless steel retaining rings, and the maximum thickness for the retaining ring fixed optical component is 6.6 mm. The 2 knobless M4×0.2 precision adjusters allow for adjustment of the optical component's pitch and yaw using a hex key. The side of the optical mount features an M4 countersunk mounting hole. Purchasing the LBTEK vacuum-compatible mount includes vacuum-compatible hex socket ultra-thin head screws (with vent holes) and a hex key.\u003c\/p\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-tips\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor installing optical components with a diameter of 12.7 mm\u003c\/li\u003e\n  \u003cli\u003e2 M4×0.2 precision adjusters without knobs\u003c\/li\u003e\n  \u003cli\u003eAdjustable angle ±5°\u003c\/li\u003e\n  \u003cli\u003eTwo optical component fixing methods available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-explain\"\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e0.5-inch vacuum stainless steel mounts are commonly used for installing optical components such as mirrors.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47499591516314,"sku":"VSS-MT-AM05T1","price":240.12,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/05s1_05t1_E5_B7_A6_E5_9B_BE-FgTP-gU1WuvlTmGY94SZOJVurYZK.jpg?v=1772282019"},{"product_id":"0-5-inch-vacuum-compatible-stainless-steel-optical-mount-vss-mt-am05s1","title":"0.5-inch vacuum-compatible stainless steel optical mount VSS-MT-AM05S1","description":"\u003cp\u003eThe 0.5-inch vacuum-compatible stainless steel optical mount VSS-MT-AM05S1 from WaveQuanta is a high-performance Mounts Holders designed for precision optical alignment and component mounting. Available from stock for immediate shipment. Sourced directly from WaveQuanta, this product meets the high standards required for scientific research and precision photonics applications.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #16a34a;\"\u003e✔ In Stock — Ships Today\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-desc\"\u003e\u003cp\u003eLBTEK 0.5-inch Vacuum Stainless Steel Mount for mounting 12.7 mm diameter optical components, with 2 knobless M4×0.2 precision adjusters. Two optical component fixing methods are available: VSS-MT-AM05S1 uses flexible spring plates and a set screw to secure the optical component, with a minimum component thickness of 2 mm; VSS-MT-AM05T1 uses a retaining ring to directly secure the optical component. The purchase of the mount includes 2 stainless steel retaining rings, and the maximum thickness for the retaining ring fixed optical component is 6.6 mm. The 2 knobless M4×0.2 precision adjusters allow for adjustment of the optical component's pitch and yaw using a hex key. The side of the optical mount features an M4 countersunk mounting hole. Purchasing the LBTEK vacuum-compatible mount includes vacuum-compatible hex socket ultra-thin head screws (with vent holes) and a hex key.\u003c\/p\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-tips\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor installing optical components with a diameter of 12.7 mm\u003c\/li\u003e\n  \u003cli\u003e2 M4×0.2 precision adjusters without knobs\u003c\/li\u003e\n  \u003cli\u003eAdjustable angle ±5°\u003c\/li\u003e\n  \u003cli\u003eTwo optical component fixing methods available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-explain\"\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e0.5-inch vacuum stainless steel mounts are commonly used for installing optical components such as mirrors.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47499591581850,"sku":"VSS-MT-AM05S1","price":226.91,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/05s1_05t1_E5_B7_A6_E5_9B_BE-FgTP-gU1WuvlTmGY94SZOJVurYZK_f0db30ca-8de4-43ad-a277-46c6c51ef52e.jpg?v=1772282020"},{"product_id":"0-5-inch-vacuum-compatible-stainless-steel-optical-mount-vss-mt-am05s5","title":"0.5-inch vacuum-compatible stainless steel optical mount VSS-MT-AM05S5","description":"\u003cp\u003e\u003cstrong\u003e0.5-inch vacuum-compatible stainless steel optical mount VSS-MT-AM05S5\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #16a34a;\"\u003e✔ In Stock — Ships Today\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-desc\"\u003e\u003cp\u003eLBTEK 0.5-inch Vacuum-Compatible Stainless Steel Lens Mount, with 2 Locking Rings and Vertical Drive Adjusters, designed for mounting optical components with a diameter of 12.7 mm in situations where there is no space behind the mount to use horizontal adjusters. The optical component is secured using flexible spring leaves and set screws. The two M4×0.2 precision adjusters with locking rings (knobless) provide an angular adjustment range of ±3.5° for the mount. The knobless adjusters are adjusted using a hex key. Additionally, the optical adjustment mount features M4 countersunk mounting holes on the side. The purchase of the LBTEK vacuum-compatible lens mount includes vacuum-compatible hex socket ultra-thin head screws (with vent holes) and a hex key.\u003c\/p\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-tips\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUltra-thin design, thickness only 18.1 mm\u003c\/li\u003e\n  \u003cli\u003eAdjustable angle ±3.5°\u003c\/li\u003e\n  \u003cli\u003e2 precision adjusters with lock rings, no knobs\u003c\/li\u003e\n  \u003cli\u003eFlexible spring leaf and fixing screws secure 12.7 mm optical elements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-explain\"\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003e0.5-inch vacuum-compatible stainless steel lens mount for use with stainless steel rods and gap-free clamping blocks.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47499591647386,"sku":"VSS-MT-AM05S5","price":461.47,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/05s5-FvM8mV1H0F7eAYr-SOyHXOnDoRNI.jpg?v=1772282022"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/collections\/0.5_E4_BA_A7_E5_93_81_E9_9B_86_E5_B0_8F_E5_9B_BE-FgzobAY2zgZiVLOeKPplYXjaz_M9.jpg?v=1777884041","url":"https:\/\/waveqvanta.com\/collections\/lbtek-optomechanics-vacuum-mounts-0-5-inch-vacuum-compatible-stainless-steel-optical-mount.oembed","provider":"WaveQuanta","version":"1.0","type":"link"}