{"title":"Ø25 mm vacuum rod and accessories","description":"LBTEK vacuum series connecting rods and zero-gap clamps are made of 316L stainless steel. All products in this series are manufactured from the same material and undergo the same heat treatment process, resulting in a low coefficient of thermal expansion, which enhances the stability of the overall system. Each connecting rod features an M4 thread on the top and an M6 thread on the bottom, both with a Ø2 mm positioning hole for aligning optical component mounts. The vacuum zero-gap flexible clamp features a unique structural design that ensures the mounting surface remains in tight, gap-free contact with the mounting platform during use. Made from heat-treated and stress-relieved 316L stainless steel, the clamp provides strong clamping force and is suitable for use with VSS series connecting rods to achieve stable mounting. The clamp's reversible symmetrical design allows for installation in either left-hand or right-hand orientations. The flexible clamping and mounting slots are secured by separate vacuum screws, enabling independent adjustment of the clamp's position and the connecting rod's rotational alignment. The connecting rod is locked in place via an M6 internal hex vacuum socket head cap screw on the side of the flexible clamp. The VSS series employs a unique vacuum structural design. At 23°C, the products can be used directly out of the package in a vacuum environment of 10^(-6) Torr. For applications in vacuum environments ranging from 10^(-6) Torr to 10^(-9) Torr, it is recommended to bake the product at 110°C for 5 hours before installation to remove any attached grease and moisture. Note: All VSS products are baked before leaving the factory, which may result in varying degrees of light yellow discoloration. This appearance is normal and does not affect vacuum performance. Avoid contact with greasy or wet objects when using products in this series.","products":[{"product_id":"o25-mm-vacuum-rod-and-accessories-vss-mt-op100","title":"Ø25 mm vacuum rod and accessories VSS-MT-OP100","description":"\u003cp\u003eThe Ø25 mm vacuum rod and accessories VSS-MT-OP100 from WaveQuanta is a high-performance Mounts Holders designed for precision optical alignment and component mounting. Available from stock for immediate shipment. Sourced directly from WaveQuanta, this product meets the high standards required for scientific research and precision photonics applications.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #16a34a;\"\u003e✔ In Stock — Ships Today\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-desc\"\u003e\u003cp\u003eLBTEK VSS Vacuum Series Posts are made of 316L stainless steel, heat-treated, and stress-relieved for high stability. Each post features an M4 thread on the top and an M6 thread on the bottom, both with a Ø2 mm locating hole for positioning optical component mounts. The VSS series employs a unique vacuum structure design. During packaging, a vacuum M4 set screw (with an air hole) is installed on the top of the vacuum post. The vacuum post series is available in various lengths, including 25 mm, 38 mm, 50 mm, 75 mm, and 100 mm.\u003c\/p\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-tips\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBottom M6 thread, top M4 thread\u003c\/li\u003e\n  \u003cli\u003eTop installs an M4 vacuum concave end set screw (with air hole)\u003c\/li\u003e\n  \u003cli\u003eOuter diameter\tØ25 mm\u003c\/li\u003e\n  \u003cli\u003eLength 25 mm, 38 mm, 50 mm, 75 mm, 100 mm optional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-explain\"\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eVSS Series Combination Usage\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47499593416858,"sku":"VSS-MT-OP100","price":86.73,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/E7_BB_84_E5_90_88_E5_9B_BE-FjIGe2XnzyDnCpG0EGNwVjOvqU44.jpg?v=1772282040"},{"product_id":"o25-mm-vacuum-rod-and-accessories-vss-mt-op75","title":"Ø25 mm vacuum rod and accessories VSS-MT-OP75","description":"\u003cp\u003eThe Ø25 mm vacuum rod and accessories VSS-MT-OP75 from WaveQuanta is a high-performance Mounts Holders designed for precision optical alignment and component mounting. Available from stock for immediate shipment. Sourced directly from WaveQuanta, this product meets the high standards required for scientific research and precision photonics applications.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #16a34a;\"\u003e✔ In Stock — Ships Today\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-desc\"\u003e\u003cp\u003eLBTEK VSS Vacuum Series Posts are made of 316L stainless steel, heat-treated, and stress-relieved for high stability. Each post features an M4 thread on the top and an M6 thread on the bottom, both with a Ø2 mm locating hole for positioning optical component mounts. The VSS series employs a unique vacuum structure design. During packaging, a vacuum M4 set screw (with an air hole) is installed on the top of the vacuum post. The vacuum post series is available in various lengths, including 25 mm, 38 mm, 50 mm, 75 mm, and 100 mm.\u003c\/p\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-tips\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBottom M6 thread, top M4 thread\u003c\/li\u003e\n  \u003cli\u003eTop installs an M4 vacuum concave end set screw (with air hole)\u003c\/li\u003e\n  \u003cli\u003eOuter diameter\tØ25 mm\u003c\/li\u003e\n  \u003cli\u003eLength 25 mm, 38 mm, 50 mm, 75 mm, 100 mm optional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-explain\"\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eVSS Series Combination Usage\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47499593482394,"sku":"VSS-MT-OP75","price":80.41,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/E7_BB_84_E5_90_88_E5_9B_BE-FjIGe2XnzyDnCpG0EGNwVjOvqU44_b4c30eb7-91e2-4820-a2f6-1abe1fceea07.jpg?v=1772282040"},{"product_id":"o25-mm-vacuum-rod-and-accessories-vss-mt-op50","title":"Ø25 mm vacuum rod and accessories VSS-MT-OP50","description":"\u003cp\u003eThe Ø25 mm vacuum rod and accessories VSS-MT-OP50 from WaveQuanta is a high-performance Mounts Holders designed for precision optical alignment and component mounting. Available from stock for immediate shipment. Sourced directly from WaveQuanta, this product meets the high standards required for scientific research and precision photonics applications.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #16a34a;\"\u003e✔ In Stock — Ships Today\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-desc\"\u003e\u003cp\u003eLBTEK VSS Vacuum Series Posts are made of 316L stainless steel, heat-treated, and stress-relieved for high stability. Each post features an M4 thread on the top and an M6 thread on the bottom, both with a Ø2 mm locating hole for positioning optical component mounts. The VSS series employs a unique vacuum structure design. During packaging, a vacuum M4 set screw (with an air hole) is installed on the top of the vacuum post. The vacuum post series is available in various lengths, including 25 mm, 38 mm, 50 mm, 75 mm, and 100 mm.\u003c\/p\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-tips\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBottom M6 thread, top M4 thread\u003c\/li\u003e\n  \u003cli\u003eTop installs an M4 vacuum concave end set screw (with air hole)\u003c\/li\u003e\n  \u003cli\u003eOuter diameter\tØ25 mm\u003c\/li\u003e\n  \u003cli\u003eLength 25 mm, 38 mm, 50 mm, 75 mm, 100 mm optional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-explain\"\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eVSS Series Combination Usage\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47499593547930,"sku":"VSS-MT-OP50","price":72.99,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/E7_BB_84_E5_90_88_E5_9B_BE-FjIGe2XnzyDnCpG0EGNwVjOvqU44_ae9042d1-5df1-414c-99ee-64392bf0467f.jpg?v=1772282042"},{"product_id":"o25-mm-vacuum-rod-and-accessories-vss-mt-op38","title":"Ø25 mm vacuum rod and accessories VSS-MT-OP38","description":"\u003cp\u003eThe Ø25 mm vacuum rod and accessories VSS-MT-OP38 from WaveQuanta is a high-performance Mounts Holders designed for precision optical alignment and component mounting. Available from stock for immediate shipment. Sourced directly from WaveQuanta, this product meets the high standards required for scientific research and precision photonics applications.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #16a34a;\"\u003e✔ In Stock — Ships Today\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-desc\"\u003e\u003cp\u003eLBTEK VSS Vacuum Series Posts are made of 316L stainless steel, heat-treated, and stress-relieved for high stability. Each post features an M4 thread on the top and an M6 thread on the bottom, both with a Ø2 mm locating hole for positioning optical component mounts. The VSS series employs a unique vacuum structure design. During packaging, a vacuum M4 set screw (with an air hole) is installed on the top of the vacuum post. The vacuum post series is available in various lengths, including 25 mm, 38 mm, 50 mm, 75 mm, and 100 mm.\u003c\/p\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-tips\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBottom M6 thread, top M4 thread\u003c\/li\u003e\n  \u003cli\u003eTop installs an M4 vacuum concave end set screw (with air hole)\u003c\/li\u003e\n  \u003cli\u003eOuter diameter\tØ25 mm\u003c\/li\u003e\n  \u003cli\u003eLength 25 mm, 38 mm, 50 mm, 75 mm, 100 mm optional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-explain\"\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eVSS Series Combination Usage\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47499593908378,"sku":"VSS-MT-OP38","price":67.7,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/E7_BB_84_E5_90_88_E5_9B_BE-FjIGe2XnzyDnCpG0EGNwVjOvqU44_2c9502df-c48d-408b-8a20-0cf2abe726c6.jpg?v=1772282042"},{"product_id":"o25-mm-vacuum-rod-and-accessories-vss-mt-op25","title":"Ø25 mm vacuum rod and accessories VSS-MT-OP25","description":"\u003cp\u003e\u003cstrong\u003eØ25 mm vacuum rod and accessories VSS-MT-OP25\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #16a34a;\"\u003e✔ In Stock — Ships Today\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-desc\"\u003e\u003cp\u003eLBTEK VSS Vacuum Series Posts are made of 316L stainless steel, heat-treated, and stress-relieved for high stability. Each post features an M4 thread on the top and an M6 thread on the bottom, both with a Ø2 mm locating hole for positioning optical component mounts. The VSS series employs a unique vacuum structure design. During packaging, a vacuum M4 set screw (with an air hole) is installed on the top of the vacuum post. The vacuum post series is available in various lengths, including 25 mm, 38 mm, 50 mm, 75 mm, and 100 mm.\u003c\/p\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-tips\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBottom M6 thread, top M4 thread\u003c\/li\u003e\n  \u003cli\u003eTop installs an M4 vacuum concave end set screw (with air hole)\u003c\/li\u003e\n  \u003cli\u003eOuter diameter\tØ25 mm\u003c\/li\u003e\n  \u003cli\u003eLength 25 mm, 38 mm, 50 mm, 75 mm, 100 mm optional\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-explain\"\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eVSS Series Combination Usage\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47499593941146,"sku":"VSS-MT-OP25","price":65.57,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/E7_BB_84_E5_90_88_E5_9B_BE-FjIGe2XnzyDnCpG0EGNwVjOvqU44_444db7bc-7572-4c73-922a-e9b34b14518a.jpg?v=1772282043"},{"product_id":"o25-mm-vacuum-rod-and-accessories-vss-mt-phc25","title":"Ø25 mm vacuum rod and accessories VSS-MT-PHC25","description":"\u003cp\u003e\u003cstrong\u003eØ25 mm vacuum rod and accessories VSS-MT-PHC25\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #16a34a;\"\u003e✔ In Stock — Ships Today\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-desc\"\u003e\u003cp\u003eLBTEK Vacuum Gap-Free Flexible Clamp, used for mounting Ø25 mm vacuum rods. The flexible clamp and mounting slot are secured by separate vacuum screws. The rod is locked by an M6 hex socket vacuum cap screw on the side of the flexible clamp. Each clamp comes with one M6 hex socket vacuum screw and one Ø6 mm vacuum flat washer for slotted hole installation. Note: the rough side of the washer should face the screw, and the smooth side should face the clamp. Due to the flexible design of the product, do not tighten the screw when the clamp is empty, as this will cause damage to the product.\u003c\/p\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-tips\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor Ø25 mm extension rod\u003c\/li\u003e\n  \u003cli\u003eDifferent waist-shaped counterbore lengths can be selected according to requirements\u003c\/li\u003e\n  \u003cli\u003e3-point contact, flexible clamping mechanism\u003c\/li\u003e\n  \u003cli\u003eIncludes M6 vacuum screw (with air hole)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-explain\"\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eVacuum gap-free flexible clamp block compatible with Ø25 mm vacuum connecting rod\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47499593973914,"sku":"VSS-MT-PHC25","price":156.56,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/E7_BB_84_E5_90_88_E5_9B_BE-FpWIj0mRpEQAy7nPvOhfcao2UZv5.jpg?v=1772282046"},{"product_id":"o25-mm-vacuum-rod-and-accessories-vss-mt-phc25s","title":"Ø25 mm vacuum rod and accessories VSS-MT-PHC25S","description":"\u003cp\u003e\u003cstrong\u003eØ25 mm vacuum rod and accessories VSS-MT-PHC25S\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"color: #16a34a;\"\u003e✔ In Stock — Ships Today\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-desc\"\u003e\u003cp\u003eLBTEK Vacuum Gap-Free Flexible Clamp, used for mounting Ø25 mm vacuum rods. The flexible clamp and mounting slot are secured by separate vacuum screws. The rod is locked by an M6 hex socket vacuum cap screw on the side of the flexible clamp. Each clamp comes with one M6 hex socket vacuum screw and one Ø6 mm vacuum flat washer for slotted hole installation. Note: the rough side of the washer should face the screw, and the smooth side should face the clamp. Due to the flexible design of the product, do not tighten the screw when the clamp is empty, as this will cause damage to the product.\u003c\/p\u003e\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-tips\"\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor Ø25 mm extension rod\u003c\/li\u003e\n  \u003cli\u003eDifferent waist-shaped counterbore lengths can be selected according to requirements\u003c\/li\u003e\n  \u003cli\u003e3-point contact, flexible clamping mechanism\u003c\/li\u003e\n  \u003cli\u003eIncludes M6 vacuum screw (with air hole)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003cdiv class=\"wq-pdp__lbtek-explain\"\u003e\n\u003ch3\u003eApplication\u003c\/h3\u003e\n\u003cp\u003eVacuum gap-free flexible clamp block compatible with Ø25 mm vacuum connecting rod\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47499594006682,"sku":"VSS-MT-PHC25S","price":147.29,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/E7_BB_84_E5_90_88_E5_9B_BE-FpWIj0mRpEQAy7nPvOhfcao2UZv5_6aaf9bcc-be3e-4350-8d8f-261e83df07c0.jpg?v=1772282046"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/collections\/E4_BA_A7_E5_93_81_E9_9B_86_E5_B0_8F_E5_9B_BE-Fp4Xp9SgbAWLO0vsHJOHNkMlHuyi.jpg?v=1777884042","url":"https:\/\/waveqvanta.com\/collections\/lbtek-optomechanics-vacuum-mounts-25-mm-vacuum-rod-and-accessories.oembed","provider":"WaveQuanta","version":"1.0","type":"link"}