{"title":"Polarization Optics","description":"\u003cp\u003ePolarization control optics for ultrafast laser systems — including thin-film polarizers (TFP), wave plates (λ\/2 and λ\/4), and flat beam splitters. Designed for high damage threshold and minimal phase distortion across the operating bandwidth.\u003c\/p\u003e","products":[{"product_id":"800nm-flat-beam-splitter-45","title":"800nm Flat Beam Splitter 45°","description":"\u003cp\u003e800nm Flat Beam Splitter 45°\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47473877876890,"sku":"BS1631-25.4-1","price":206.9,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08149874042962427_350.png?v=1772512207"},{"product_id":"800nm-flat-beam-splitter-46","title":"800nm Flat Beam Splitter 45°","description":"\u003cp\u003e800nm Flat Beam Splitter 45°\u003c\/p\u003e","brand":"Ultrafast Innovations","offers":[{"title":"Default Title","offer_id":47473877909658,"sku":"O-BS-25.4-BL227","price":1900.66,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08149874044724490_350.png?v=1772512209"},{"product_id":"800nm-flat-beam-splitter-47","title":"800nm Flat Beam Splitter 45°","description":"\u003cp\u003e800nm Flat Beam Splitter 45°\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47473877975194,"sku":"O-BS-50.8-9.0-BL228","price":482.76,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08149874046459094_350.png?v=1772512211"},{"product_id":"1030nm-flat-beam-splitter-0","title":"1030nm Flat Beam Splitter 0°","description":"\u003cp\u003e1030nm Flat Beam Splitter 0°\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47473878007962,"sku":"O-BS-25.4-3.0-BL223","price":206.9,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08149878144869314_350.png?v=1772512213"},{"product_id":"1030nm-flat-beam-splitter-45","title":"1030nm Flat Beam Splitter 45°","description":"\u003cp\u003e1030nm Flat Beam Splitter 45°\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47473878040730,"sku":"O-BS-25.4-3.0-BL224","price":206.9,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08149878146564834_350.png?v=1772512216"},{"product_id":"1030nm-flat-beam-splitter-46","title":"1030nm Flat Beam Splitter 45°","description":"\u003cp\u003e1030nm Flat Beam Splitter 45°\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47473878073498,"sku":"O-BS-25.4-4.0-BL225","price":206.9,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08149878148266468_350.png?v=1772512218"},{"product_id":"1030nm-flat-beam-splitter-47","title":"1030nm Flat Beam Splitter 45°","description":"\u003cp\u003e1030nm Flat Beam Splitter 45°\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47473878106266,"sku":"O-BS-50.8-9.0-BL226","price":482.76,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08149878149979830_350.png?v=1772512220"},{"product_id":"1030nm-flat-beam-splitter-1","title":"1030nm Flat Beam Splitter 0°","description":"\u003cp\u003e1030nm Flat Beam Splitter 0° — a polarization optic from Optoman, designed for polarization control, analysis, and beam splitting applications.\u003c\/p\u003e\n\u003cp\u003eSpecifications including extinction ratio, transmission, and damage threshold are available on request. Contact our team for polarization system design support.\u003c\/p\u003e\n\u003cp\u003eSKU: PLW-DEG0.5-UVFS-12.7-5.0-PR182-AR763\u003c\/p\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47473878139034,"sku":"PLW-DEG0.5-UVFS-12.7-5.0-PR182-AR763","price":280.15,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08149878151689132_350.png?v=1772512222"},{"product_id":"1030nm-flat-beam-splitter-48","title":"1030nm Flat Beam Splitter 45°","description":"\u003cp\u003e1030nm Flat Beam Splitter 45° — a polarization optic from Optoman, designed for polarization control, analysis, and beam splitting applications.\u003c\/p\u003e\n\u003cp\u003eSpecifications including extinction ratio, transmission, and damage threshold are available on request. Contact our team for polarization system design support.\u003c\/p\u003e\n\u003cp\u003eSKU: PP-UVFS-12.7-6.35-PR95-AR206\u003c\/p\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47473878204570,"sku":"PP-UVFS-12.7-6.35-PR95-AR206","price":496.38,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08149878154409146_350.png?v=1772512225"},{"product_id":"1030nm-flat-beam-splitter-49","title":"1030nm Flat Beam Splitter 45°","description":"\u003cp\u003e1030nm Flat Beam Splitter 45° — a polarization optic from Optoman, designed for polarization control, analysis, and beam splitting applications.\u003c\/p\u003e\n\u003cp\u003eSpecifications including extinction ratio, transmission, and damage threshold are available on request. Contact our team for polarization system design support.\u003c\/p\u003e\n\u003cp\u003eSKU: PP-UVFS-25.4-5.0-PR126\u003c\/p\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47473878237338,"sku":"PP-UVFS-25.4-5.0-PR126","price":280.15,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08149878156921640_350.png?v=1772512232"},{"product_id":"1064nm-flat-beam-splitter-45","title":"1064nm Flat Beam Splitter 45°","description":"\u003cp\u003e1064nm Flat Beam Splitter 45° — a polarization optic from Optoman, designed for polarization control, analysis, and beam splitting applications.\u003c\/p\u003e\n\u003cp\u003eSpecifications including extinction ratio, transmission, and damage threshold are available on request. Contact our team for polarization system design support.\u003c\/p\u003e\n\u003cp\u003eSKU: PP-UVFS-25.4-3.0-PRM22-AR99\u003c\/p\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47473878270106,"sku":"PP-UVFS-25.4-3.0-PRM22-AR99","price":299.99,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150458662961332_350.png?v=1772512234"},{"product_id":"1064nm-flat-beam-splitter-46","title":"1064nm Flat Beam Splitter 45°","description":"\u003cp\u003e1064nm Flat Beam Splitter 45° — a polarization optic from Optoman, designed for polarization control, analysis, and beam splitting applications.\u003c\/p\u003e\n\u003cp\u003eSpecifications including extinction ratio, transmission, and damage threshold are available on request. Contact our team for polarization system design support.\u003c\/p\u003e\n\u003cp\u003eSKU: PP-UVFS-25.4-6.35-PR194\u003c\/p\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47473878335642,"sku":"PP-UVFS-25.4-6.35-PR194","price":1800.63,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150458665519543_350.png?v=1772512237"},{"product_id":"1150nm-flat-beam-splitter-45","title":"1150nm Flat Beam Splitter 45°","description":"\u003cp\u003e1150nm Flat Beam Splitter 45° — a polarization optic from Optoman, designed for polarization control, analysis, and beam splitting applications.\u003c\/p\u003e\n\u003cp\u003eSpecifications including extinction ratio, transmission, and damage threshold are available on request. Contact our team for polarization system design support.\u003c\/p\u003e\n\u003cp\u003eSKU: PP-UVFS-25.4-3.0-PR145-AR582\u003c\/p\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47473878401178,"sku":"PP-UVFS-25.4-3.0-PR145-AR582","price":1160.65,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150460954278860_350.png?v=1772512239"},{"product_id":"2940nm-flat-beam-splitter-0","title":"2940nm Flat Beam Splitter 0°","description":"\u003cp\u003e2940nm Flat Beam Splitter 0° — a polarization optic from Optoman, designed for polarization control, analysis, and beam splitting applications.\u003c\/p\u003e\n\u003cp\u003eSpecifications including extinction ratio, transmission, and damage threshold are available on request. Contact our team for polarization system design support.\u003c\/p\u003e\n\u003cp\u003eSKU: WQ-PP-Si-127-60-PR146-AR574\u003c\/p\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47473878433946,"sku":"WQ-PP-Si-127-60-PR146-AR574","price":960.24,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150467447496792_350.png?v=1772512241"},{"product_id":"ultra-broadband-flat-beam-splitter-45","title":"Ultra-Broadband Flat Beam Splitter 45°","description":"\u003cp\u003eUltra-Broadband Flat Beam Splitter 45° — a polarization optic from Ultrafast Innovations, designed for polarization control, analysis, and beam splitting applications.\u003c\/p\u003e\n\u003cp\u003eSpecifications including extinction ratio, transmission, and damage threshold are available on request. Contact our team for polarization system design support.\u003c\/p\u003e\n\u003cp\u003eSKU: BS2021-25.4-1\u003c\/p\u003e","brand":"Ultrafast Innovations","offers":[{"title":"Default Title","offer_id":47473878565018,"sku":"BS2021-25.4-1","price":2661.29,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08054798436926383_350.png?v=1772512244"},{"product_id":"ultra-broadband-flat-beam-splitter-46","title":"Ultra-Broadband Flat Beam Splitter 45°","description":"\u003cp\u003eUltra-Broadband Flat Beam Splitter 45° — a polarization optic from Ultrafast Innovations, designed for polarization control, analysis, and beam splitting applications.\u003c\/p\u003e\n\u003cp\u003eSpecifications including extinction ratio, transmission, and damage threshold are available on request. Contact our team for polarization system design support.\u003c\/p\u003e\n\u003cp\u003eSKU: BS2021-12.7-1\u003c\/p\u003e","brand":"Ultrafast Innovations","offers":[{"title":"Default Title","offer_id":47473878630554,"sku":"BS2021-12.7-1","price":2661.29,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08054798439710176_350.png?v=1772512246"},{"product_id":"ultra-broadband-flat-beam-splitter-0","title":"Ultra-Broadband Flat Beam Splitter 0°","description":"\u003cp\u003eUltra-Broadband Flat Beam Splitter 0° — a polarization optic from Ultrafast Innovations, designed for polarization control, analysis, and beam splitting applications.\u003c\/p\u003e\n\u003cp\u003eSpecifications including extinction ratio, transmission, and damage threshold are available on request. Contact our team for polarization system design support.\u003c\/p\u003e\n\u003cp\u003eSKU: F1551-25.4-2\u003c\/p\u003e","brand":"Ultrafast Innovations","offers":[{"title":"Default Title","offer_id":47473878663322,"sku":"F1551-25.4-2","price":1750.67,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08054798442465454_350.png?v=1772512248"},{"product_id":"ultra-broadband-flat-beam-splitter-1","title":"Ultra-Broadband Flat Beam Splitter 0°","description":"\u003cp\u003eUltra-Broadband Flat Beam Splitter 0° — a polarization optic from Ultrafast Innovations, designed for polarization control, analysis, and beam splitting applications.\u003c\/p\u003e\n\u003cp\u003eSpecifications including extinction ratio, transmission, and damage threshold are available on request. Contact our team for polarization system design support.\u003c\/p\u003e\n\u003cp\u003eSKU: F1551-25.4-4\u003c\/p\u003e","brand":"Ultrafast Innovations","offers":[{"title":"Default Title","offer_id":47473878696090,"sku":"F1551-25.4-4","price":1750.67,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08054798445238405_350.png?v=1772512250"},{"product_id":"800nm-flat-beam-splitter","title":"800nm Flat Beam Splitter","description":"\u003cp\u003e800nm Flat Beam Splitter\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47473878728858,"sku":"O-BS-25.0-36.0-1.5-BL229","price":206.9,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08054601928204861_350.png?v=1772512252"},{"product_id":"800nm-flat-beam-splitter-1","title":"800nm Flat Beam Splitter","description":"\u003cp\u003e800nm Flat Beam Splitter\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47473878761626,"sku":"O-BS-25.0-36.0-1.5-BL230","price":206.9,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08054601929913956_350.png?v=1772512254"},{"product_id":"800nm-flat-beam-splitter-2","title":"800nm Flat Beam Splitter","description":"\u003cp\u003e800nm Flat Beam Splitter\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47473878794394,"sku":"O-BS-25.0-36.0-1.5-BL231","price":206.9,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08054601931644261_350.png?v=1772512257"},{"product_id":"2000nm-flat-beam-splitter-45","title":"2000nm Flat Beam Splitter 45°","description":"\u003cp\u003e2000nm Flat Beam Splitter 45° — a polarization optic from Optoman, designed for polarization control, analysis, and beam splitting applications.\u003c\/p\u003e\n\u003cp\u003eSpecifications including extinction ratio, transmission, and damage threshold are available on request. Contact our team for polarization system design support.\u003c\/p\u003e\n\u003cp\u003eSKU: PP-IRFS-25.4-2.0-PR124-PR124\u003c\/p\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47473878859930,"sku":"PP-IRFS-25.4-2.0-PR124-PR124","price":583.67,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150464839827605_350.png?v=1772512259"},{"product_id":"harmonic-beam-splitter-hr256-276nm-ht400nm-45","title":"Harmonic Beam Splitter HR256-276nm HT400nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR256-276nm HT400nm 45°\u003c\/strong\u003e (O-DM-25.4-3.0-BL232) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e266 nm\u003c\/strong\u003e, the None substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses.\u003c\/p\u003e\n\n\u003cp\u003eThe None mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArF excimer (193 nm) lithography front-ends\u003c\/li\u003e\n\u003cli\u003eDUV inspection systems\u003c\/li\u003e\n\u003cli\u003ephotoresist exposure tools\u003c\/li\u003e\n\u003cli\u003eDUV ablation chains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eNone\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 266.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474001084570,"sku":"O-DM-25.4-3.0-BL232","price":793.57,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510833678369_350.png?v=1772512522"},{"product_id":"harmonic-beam-splitter-hr257nm-ht515nm-45","title":"Harmonic Beam Splitter HR257nm HT515nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR257nm HT515nm 45°\u003c\/strong\u003e (PP-UVFS-12.7-3.0-DM214-AR362) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e257 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN2890).\u003c\/p\u003e\n\n\u003cp\u003eThe 12.7 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArF excimer (193 nm) lithography front-ends\u003c\/li\u003e\n\u003cli\u003eDUV inspection systems\u003c\/li\u003e\n\u003cli\u003ephotoresist exposure tools\u003c\/li\u003e\n\u003cli\u003eDUV ablation chains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 257.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474001182874,"sku":"PP-UVFS-12.7-3.0-DM214-AR362","price":660.28,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510835371836_350.png?v=1772512525"},{"product_id":"harmonic-beam-splitter-hr257nm-ht515-1030nm-42-48","title":"Harmonic Beam Splitter HR257nm HT515+1030nm 42-48°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR257nm HT515+1030nm 42-48°\u003c\/strong\u003e (PP-UVFS-12.7-6.35-DM220-AR652) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e48.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e257 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN5658).\u003c\/p\u003e\n\n\u003cp\u003eThe 12.7 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArF excimer (193 nm) lithography front-ends\u003c\/li\u003e\n\u003cli\u003eDUV inspection systems\u003c\/li\u003e\n\u003cli\u003ephotoresist exposure tools\u003c\/li\u003e\n\u003cli\u003eDUV ablation chains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 257.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474001215642,"sku":"PP-UVFS-12.7-6.35-DM220-AR652","price":380.13,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510838079910_350.png?v=1772512527"},{"product_id":"harmonic-beam-splitter-hr257nm-ht515-1030nm-42-49","title":"Harmonic Beam Splitter HR257nm HT515+1030nm 42-48°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR257nm HT515+1030nm 42-48°\u003c\/strong\u003e (WQ-PP-UVFS-127-635-DM220-AR652) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e48.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e257 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN5658).\u003c\/p\u003e\n\n\u003cp\u003eThe 127.0 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArF excimer (193 nm) lithography front-ends\u003c\/li\u003e\n\u003cli\u003eDUV inspection systems\u003c\/li\u003e\n\u003cli\u003ephotoresist exposure tools\u003c\/li\u003e\n\u003cli\u003eDUV ablation chains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 257.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474001248410,"sku":"WQ-PP-UVFS-127-635-DM220-AR652","price":440.05,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510840617866_350.png?v=1772512529"},{"product_id":"harmonic-beam-splitter-hr257nm-ht515nm-46","title":"Harmonic Beam Splitter HR257nm HT515nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR257nm HT515nm 45°\u003c\/strong\u003e (PP-UVFS-25.4-3.0-DM429-AR362) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e257 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN7101).\u003c\/p\u003e\n\n\u003cp\u003eThe 25.4 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArF excimer (193 nm) lithography front-ends\u003c\/li\u003e\n\u003cli\u003eDUV inspection systems\u003c\/li\u003e\n\u003cli\u003ephotoresist exposure tools\u003c\/li\u003e\n\u003cli\u003eDUV ablation chains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 257.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474001313946,"sku":"PP-UVFS-25.4-3.0-DM429-AR362","price":760.24,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510843159969_350.png?v=1772512531"},{"product_id":"harmonic-beam-splitter-hr257nm-ht515nm-47","title":"Harmonic Beam Splitter HR257nm HT515nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR257nm HT515nm 45°\u003c\/strong\u003e (PP-UVFS-25.4-6.35-DM214-AR362) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e257 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN2889).\u003c\/p\u003e\n\n\u003cp\u003eThe 25.4 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArF excimer (193 nm) lithography front-ends\u003c\/li\u003e\n\u003cli\u003eDUV inspection systems\u003c\/li\u003e\n\u003cli\u003ephotoresist exposure tools\u003c\/li\u003e\n\u003cli\u003eDUV ablation chains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 257.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474001346714,"sku":"PP-UVFS-25.4-6.35-DM214-AR362","price":1120.54,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510845863348_350.png?v=1772512534"},{"product_id":"harmonic-beam-splitter-hr257nm-ht515-1030nm-45","title":"Harmonic Beam Splitter HR257nm HT515+1030nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR257nm HT515+1030nm 45°\u003c\/strong\u003e (PP-UVFS-25.4-6.35-DM520-AR943) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e257 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN8458).\u003c\/p\u003e\n\n\u003cp\u003eThe 25.4 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArF excimer (193 nm) lithography front-ends\u003c\/li\u003e\n\u003cli\u003eDUV inspection systems\u003c\/li\u003e\n\u003cli\u003ephotoresist exposure tools\u003c\/li\u003e\n\u003cli\u003eDUV ablation chains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 257.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474001379482,"sku":"PP-UVFS-25.4-6.35-DM520-AR943","price":1520.51,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510848540798_350.png?v=1772512536"},{"product_id":"harmonic-beam-splitter-hr257nm-ht515-1030nm-46","title":"Harmonic Beam Splitter HR257nm HT515+1030nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR257nm HT515+1030nm 45°\u003c\/strong\u003e (PP-UVFS-25.4-6.35-DM265-AR465) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e257 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN4086).\u003c\/p\u003e\n\n\u003cp\u003eThe 25.4 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArF excimer (193 nm) lithography front-ends\u003c\/li\u003e\n\u003cli\u003eDUV inspection systems\u003c\/li\u003e\n\u003cli\u003ephotoresist exposure tools\u003c\/li\u003e\n\u003cli\u003eDUV ablation chains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 257.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474001412250,"sku":"PP-UVFS-25.4-6.35-DM265-AR465","price":920.58,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510851291059_350.png?v=1772512538"},{"product_id":"harmonic-beam-splitter-hr257nm-ht515nm-48","title":"Harmonic Beam Splitter HR257nm HT515nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR257nm HT515nm 45°\u003c\/strong\u003e (O-DM-25.4-9.0-BL233) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e257 nm\u003c\/strong\u003e, the None substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses.\u003c\/p\u003e\n\n\u003cp\u003eThe None mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArF excimer (193 nm) lithography front-ends\u003c\/li\u003e\n\u003cli\u003eDUV inspection systems\u003c\/li\u003e\n\u003cli\u003ephotoresist exposure tools\u003c\/li\u003e\n\u003cli\u003eDUV ablation chains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eNone\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 257.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47474001445018,"sku":"O-DM-25.4-9.0-BL233","price":255.17,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510853975596_350.png?v=1772512540"},{"product_id":"harmonic-beam-splitter-hr257nm-ht515nm-49","title":"Harmonic Beam Splitter HR257nm HT515nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR257nm HT515nm 45°\u003c\/strong\u003e (O-DM-50.8-9.0-BL234) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e257 nm\u003c\/strong\u003e, the None substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses.\u003c\/p\u003e\n\n\u003cp\u003eThe None mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eArF excimer (193 nm) lithography front-ends\u003c\/li\u003e\n\u003cli\u003eDUV inspection systems\u003c\/li\u003e\n\u003cli\u003ephotoresist exposure tools\u003c\/li\u003e\n\u003cli\u003eDUV ablation chains\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eNone\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 257.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47474001510554,"sku":"O-DM-50.8-9.0-BL234","price":482.76,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510855674339_350.png?v=1772512542"},{"product_id":"harmonic-beam-splitter-hr400nm-ht800nm-45","title":"Harmonic Beam Splitter HR400nm HT800nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR400nm HT800nm 45°\u003c\/strong\u003e (O-DM-25.4-3.0-BL235) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e400 nm\u003c\/strong\u003e, the None substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses.\u003c\/p\u003e\n\n\u003cp\u003eThe None mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003esecond-harmonic Nd:YAG\/Yb (515\/532 nm) outputs\u003c\/li\u003e\n\u003cli\u003ebiomedical fluorescence imaging\u003c\/li\u003e\n\u003cli\u003evisible OPA outputs\u003c\/li\u003e\n\u003cli\u003ehigh-resolution microscopy\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eNone\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 400.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474001608858,"sku":"O-DM-25.4-3.0-BL235","price":734.05,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510857374943_350.png?v=1772512544"},{"product_id":"harmonic-beam-splitter-hr500-530nm-ht1030nm-45","title":"Harmonic Beam Splitter HR500-530nm HT1030nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR500-530nm HT1030nm 45°\u003c\/strong\u003e (PP-UVFS-20.0-3.0-DM77-AR120) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e515 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN5024).\u003c\/p\u003e\n\n\u003cp\u003eThe 20.0 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeNe systems (633 nm)\u003c\/li\u003e\n\u003cli\u003evisible Ti:Sapphire side-band\u003c\/li\u003e\n\u003cli\u003epump-probe spectroscopy\u003c\/li\u003e\n\u003cli\u003ered-channel multiphoton imaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 515.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474005213338,"sku":"PP-UVFS-20.0-3.0-DM77-AR120","price":460.29,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510859072223_350.png?v=1772512546"},{"product_id":"harmonic-beam-splitter-hr510-530nm-ht1030nm-45","title":"Harmonic Beam Splitter HR510-530nm HT1030nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR510-530nm HT1030nm 45°\u003c\/strong\u003e (PP-UVFS-25.4-6.35-DM371) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e520 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses.\u003c\/p\u003e\n\n\u003cp\u003eThe 25.4 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeNe systems (633 nm)\u003c\/li\u003e\n\u003cli\u003evisible Ti:Sapphire side-band\u003c\/li\u003e\n\u003cli\u003epump-probe spectroscopy\u003c\/li\u003e\n\u003cli\u003ered-channel multiphoton imaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 520.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474005246106,"sku":"PP-UVFS-25.4-6.35-DM371","price":920.58,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510861796345_350.png?v=1772512549"},{"product_id":"harmonic-beam-splitter-hr515nm-ht1030nm-45","title":"Harmonic Beam Splitter HR515nm HT1030nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR515nm HT1030nm 45°\u003c\/strong\u003e (PP-UVFS-12.7-3.0-DM255-AR20) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e515 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN3753).\u003c\/p\u003e\n\n\u003cp\u003eThe 12.7 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeNe systems (633 nm)\u003c\/li\u003e\n\u003cli\u003evisible Ti:Sapphire side-band\u003c\/li\u003e\n\u003cli\u003epump-probe spectroscopy\u003c\/li\u003e\n\u003cli\u003ered-channel multiphoton imaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 515.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474005278874,"sku":"PP-UVFS-12.7-3.0-DM255-AR20","price":680.1,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510864483181_350.png?v=1772512551"},{"product_id":"harmonic-beam-splitter-hr515nm-ht1030nm-46","title":"Harmonic Beam Splitter HR515nm HT1030nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR515nm HT1030nm 45°\u003c\/strong\u003e (WQ-PP-UVFS-127-30-DM77-AR120) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e515 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN5024).\u003c\/p\u003e\n\n\u003cp\u003eThe 127.0 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeNe systems (633 nm)\u003c\/li\u003e\n\u003cli\u003evisible Ti:Sapphire side-band\u003c\/li\u003e\n\u003cli\u003epump-probe spectroscopy\u003c\/li\u003e\n\u003cli\u003ered-channel multiphoton imaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 515.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474005311642,"sku":"WQ-PP-UVFS-127-30-DM77-AR120","price":380.13,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510867181659_350.png?v=1772512553"},{"product_id":"harmonic-beam-splitter-hr515nm-ht1030nm-47","title":"Harmonic Beam Splitter HR515nm HT1030nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR515nm HT1030nm 45°\u003c\/strong\u003e (PP-UVFS-20.0-3.0-DM256-AR120) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e515 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN3801).\u003c\/p\u003e\n\n\u003cp\u003eThe 20.0 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeNe systems (633 nm)\u003c\/li\u003e\n\u003cli\u003evisible Ti:Sapphire side-band\u003c\/li\u003e\n\u003cli\u003epump-probe spectroscopy\u003c\/li\u003e\n\u003cli\u003ered-channel multiphoton imaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 515.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474005377178,"sku":"PP-UVFS-20.0-3.0-DM256-AR120","price":280.15,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510869872628_350.png?v=1772512555"},{"product_id":"harmonic-beam-splitter-hr1030nm-ht515nm-0","title":"Harmonic Beam Splitter HR1030nm HT515nm 0°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR1030nm HT515nm 0°\u003c\/strong\u003e (PP-UVFS-25.4-1.0-DM372-AR706) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e0.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e1030 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN6058).\u003c\/p\u003e\n\n\u003cp\u003eThe 25.4 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYb:YAG \/ Yb:KGW thin-disk amplifiers\u003c\/li\u003e\n\u003cli\u003eindustrial fs material processing\u003c\/li\u003e\n\u003cli\u003eNd:YAG fundamental at 1064 nm\u003c\/li\u003e\n\u003cli\u003efiber CPA compressors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 1030.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474005409946,"sku":"PP-UVFS-25.4-1.0-DM372-AR706","price":1080.47,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510875527529_350.png?v=1772512558"},{"product_id":"harmonic-beam-splitter-hr515nm-ht1030nm-0","title":"Harmonic Beam Splitter HR515nm HT1030nm 0°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR515nm HT1030nm 0°\u003c\/strong\u003e (O-DM-25.4-3.0-BL236) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e0.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e515 nm\u003c\/strong\u003e, the None substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses.\u003c\/p\u003e\n\n\u003cp\u003eThe None mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeNe systems (633 nm)\u003c\/li\u003e\n\u003cli\u003evisible Ti:Sapphire side-band\u003c\/li\u003e\n\u003cli\u003epump-probe spectroscopy\u003c\/li\u003e\n\u003cli\u003ered-channel multiphoton imaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eNone\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 515.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47474005475482,"sku":"O-DM-25.4-3.0-BL236","price":255.17,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510878224066_350.png?v=1772512559"},{"product_id":"harmonic-beam-splitter-hr515nm-ht1030nm-48","title":"Harmonic Beam Splitter HR515nm HT1030nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR515nm HT1030nm 45°\u003c\/strong\u003e (O-DM-25.4-3.0-BL237) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e515 nm\u003c\/strong\u003e, the None substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses.\u003c\/p\u003e\n\n\u003cp\u003eThe None mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeNe systems (633 nm)\u003c\/li\u003e\n\u003cli\u003evisible Ti:Sapphire side-band\u003c\/li\u003e\n\u003cli\u003epump-probe spectroscopy\u003c\/li\u003e\n\u003cli\u003ered-channel multiphoton imaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eNone\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 515.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47474005573786,"sku":"O-DM-25.4-3.0-BL237","price":255.17,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510879933285_350.png?v=1772512562"},{"product_id":"harmonic-beam-splitter-hr515nm-ht1030nm-49","title":"Harmonic Beam Splitter HR515nm HT1030nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR515nm HT1030nm 45°\u003c\/strong\u003e (PP-UVFS-25.4-6.35-DM77-AR120) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e515 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN6413).\u003c\/p\u003e\n\n\u003cp\u003eThe 25.4 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeNe systems (633 nm)\u003c\/li\u003e\n\u003cli\u003evisible Ti:Sapphire side-band\u003c\/li\u003e\n\u003cli\u003epump-probe spectroscopy\u003c\/li\u003e\n\u003cli\u003ered-channel multiphoton imaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 515.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474005606554,"sku":"PP-UVFS-25.4-6.35-DM77-AR120","price":780.51,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510881635969_350.png?v=1772512564"},{"product_id":"harmonic-beam-splitter-hr515nm-ht1030nm-50","title":"Harmonic Beam Splitter HR515nm HT1030nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR515nm HT1030nm 45°\u003c\/strong\u003e (O-DM-25.4-9.0-BL238) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e515 nm\u003c\/strong\u003e, the None substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses.\u003c\/p\u003e\n\n\u003cp\u003eThe None mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeNe systems (633 nm)\u003c\/li\u003e\n\u003cli\u003evisible Ti:Sapphire side-band\u003c\/li\u003e\n\u003cli\u003epump-probe spectroscopy\u003c\/li\u003e\n\u003cli\u003ered-channel multiphoton imaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eNone\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 515.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47474005704858,"sku":"O-DM-25.4-9.0-BL238","price":255.17,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510884349375_350.png?v=1772512566"},{"product_id":"harmonic-beam-splitter-hr515nm-ht1030nm-51","title":"Harmonic Beam Splitter HR515nm HT1030nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR515nm HT1030nm 45°\u003c\/strong\u003e (O-DM-50.8-9.0-BL239) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e515 nm\u003c\/strong\u003e, the None substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses.\u003c\/p\u003e\n\n\u003cp\u003eThe None mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeNe systems (633 nm)\u003c\/li\u003e\n\u003cli\u003evisible Ti:Sapphire side-band\u003c\/li\u003e\n\u003cli\u003epump-probe spectroscopy\u003c\/li\u003e\n\u003cli\u003ered-channel multiphoton imaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eNone\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 515.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47474005737626,"sku":"O-DM-50.8-9.0-BL239","price":482.76,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510886043071_350.png?v=1772512569"},{"product_id":"harmonic-beam-splitter-hr515nm-ht1030nm-52","title":"Harmonic Beam Splitter HR515nm HT1030nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR515nm HT1030nm 45°\u003c\/strong\u003e (PP-UVFS-50.8-8.0-DM77-AR120) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e515 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN8179).\u003c\/p\u003e\n\n\u003cp\u003eThe 50.8 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHeNe systems (633 nm)\u003c\/li\u003e\n\u003cli\u003evisible Ti:Sapphire side-band\u003c\/li\u003e\n\u003cli\u003epump-probe spectroscopy\u003c\/li\u003e\n\u003cli\u003ered-channel multiphoton imaging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 515.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474005803162,"sku":"PP-UVFS-50.8-8.0-DM77-AR120","price":1000.32,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510887749797_350.png?v=1772512571"},{"product_id":"harmonic-beam-splitter-hr1030nm-ht515nm-45","title":"Harmonic Beam Splitter HR1030nm HT515nm 45°","description":"\u003cdiv\u003e\n\u003ch3\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eHarmonic Beam Splitter HR1030nm HT515nm 45°\u003c\/strong\u003e (PP-UVFS-25.4-6.35-DM479-AR921) is a flat dichroic mirror engineered for spectral combining and separating in multi-line femtosecond optical systems. The double-coating design pairs high reflectance at the operating wavelength with high transmission at the complementary band — typically used in pump-probe, harmonic-cleanup, and OPA seed-pump combining geometries. Optimized for an angle of incidence of \u003cstrong\u003e45.0°\u003c\/strong\u003e at a center wavelength of \u003cstrong\u003e1030 nm\u003c\/strong\u003e, the UVFS substrate carries an IBS-deposited dielectric stack engineered for high reflectance, low scatter, and minimal group-delay distortion of femtosecond and picosecond pulses (Optoman batch reference: PAN8178).\u003c\/p\u003e\n\n\u003cp\u003eThe 25.4 mm diameter form factor integrates directly into modern Yb-band, Ti:Sapphire, and harmonic-conversion beam paths where damage-tolerant reflectors are required. The IBS coating route delivers consistent batch-to-batch performance and excellent environmental stability under temperature, humidity, and vacuum cycling.\u003c\/p\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYb:YAG \/ Yb:KGW thin-disk amplifiers\u003c\/li\u003e\n\u003cli\u003eindustrial fs material processing\u003c\/li\u003e\n\u003cli\u003eNd:YAG fundamental at 1064 nm\u003c\/li\u003e\n\u003cli\u003efiber CPA compressors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConstruction \u0026amp; Performance\u003c\/h3\u003e\n\u003cp\u003eSubstrate: \u003cstrong\u003eUVFS\u003c\/strong\u003e, polished to laser-grade surface quality. Coating: \u003cstrong\u003eIBS multilayer dielectric\u003c\/strong\u003e, optimized for the 1030.0 nm design wavelength. Damage threshold: \u003cstrong\u003e0.2 J\/cm² @100 fs, 1 kHz\u003c\/strong\u003e — sufficient for typical kHz-class femtosecond amplifier outputs. The mount-side rear face is fine-ground for non-marring contact in standard kinematic mounts.\u003c\/p\u003e\n\n\u003cp\u003eLike all WaveQuanta ultrafast optics, this mirror ships matched to spec sheet, with reflectance and group-delay-dispersion measurements traceable to vendor batch records on request. Pair-matched sets and custom dimensions can be quoted on lead times of 4–8 weeks.\u003c\/p\u003e\n\n\u003ch3\u003eStorage \u0026amp; Handling\u003c\/h3\u003e\n\u003cp\u003eStore in original packaging at 25 °C and 40–60 % relative humidity. Clean only with high-purity (≥99 %) ethanol or acetone on lens-grade tissue using the drop-and-drag method. Avoid abrasive cloths, contact between the coating and any solid surface, and water-based cleaners; both can permanently damage the dielectric stack.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474005835930,"sku":"PP-UVFS-25.4-6.35-DM479-AR921","price":480.1,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08150510890480218_350.png?v=1772512573"},{"product_id":"1-2-wave-plate-266nm","title":"1\/2 Wave Plate 266nm","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis true zero-order air-gap waveplate is built from two crystalline-quartz plates separated by a precision air gap, delivering the low temperature sensitivity, wide acceptance angle, and high damage threshold characteristic of air-spaced zero-order designs. A half-wave (λ\/2) plate rotates the plane of linear polarization.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePolarization rotation \u0026amp; control\u003c\/li\u003e\n  \u003cli\u003eLaser systems \u0026amp; pulse conditioning\u003c\/li\u003e\n  \u003cli\u003eElectro-optic \u0026amp; interferometric setups\u003c\/li\u003e\n  \u003cli\u003ePrecision metrology\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eConstruction \u0026amp; Performance\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSubstrate:\u003c\/strong\u003e Crystalline Quartz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetardance:\u003c\/strong\u003e λ\/2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetardance Order:\u003c\/strong\u003e Zero-order (air-gap)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 266 nm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount size:\u003c\/strong\u003e 25.4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 20.0mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClear aperture:\u003c\/strong\u003e 18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AR@266nm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eStorage \u0026amp; Handling\u003c\/h2\u003e\n\u003cp\u003eStore and use at 25 °C and 40–60% relative humidity. Clean gently with ≥99% alcohol and lint-free lens tissue; avoid abrasives that may damage the coating or air-gap assembly.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47474006884506,"sku":"O-HWP-25.4-BL258","price":413.79,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08149677307319515_350.png?v=1772512602"},{"product_id":"1-2-wave-plate-532nm","title":"1\/2 Wave Plate 532nm","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis true zero-order air-gap waveplate is built from two crystalline-quartz plates separated by a precision air gap, delivering the low temperature sensitivity, wide acceptance angle, and high damage threshold characteristic of air-spaced zero-order designs. A half-wave (λ\/2) plate rotates the plane of linear polarization.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePolarization rotation \u0026amp; control\u003c\/li\u003e\n  \u003cli\u003eLaser systems \u0026amp; pulse conditioning\u003c\/li\u003e\n  \u003cli\u003eElectro-optic \u0026amp; interferometric setups\u003c\/li\u003e\n  \u003cli\u003ePrecision metrology\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eConstruction \u0026amp; Performance\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSubstrate:\u003c\/strong\u003e Crystalline Quartz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetardance:\u003c\/strong\u003e λ\/2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetardance Order:\u003c\/strong\u003e Zero-order (air-gap)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 532 nm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount size:\u003c\/strong\u003e 25.4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 30.48mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClear aperture:\u003c\/strong\u003e 24\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount type:\u003c\/strong\u003e SM1 threaded mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AR@532nm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eStorage \u0026amp; Handling\u003c\/h2\u003e\n\u003cp\u003eStore and use at 25 °C and 40–60% relative humidity. Clean gently with ≥99% alcohol and lint-free lens tissue; avoid abrasives that may damage the coating or air-gap assembly.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47474007048346,"sku":"O-HWP-30.48-BL262","price":413.79,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08149677309031731_350.png?v=1772512604"},{"product_id":"1-2-wave-plate-1030nm","title":"1\/2 Wave Plate 1030nm","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis true zero-order air-gap waveplate is built from two crystalline-quartz plates separated by a precision air gap, delivering the low temperature sensitivity, wide acceptance angle, and high damage threshold characteristic of air-spaced zero-order designs. A half-wave (λ\/2) plate rotates the plane of linear polarization.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePolarization rotation \u0026amp; control\u003c\/li\u003e\n  \u003cli\u003eLaser systems \u0026amp; pulse conditioning\u003c\/li\u003e\n  \u003cli\u003eElectro-optic \u0026amp; interferometric setups\u003c\/li\u003e\n  \u003cli\u003ePrecision metrology\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eConstruction \u0026amp; Performance\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSubstrate:\u003c\/strong\u003e Crystalline Quartz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetardance:\u003c\/strong\u003e λ\/2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetardance Order:\u003c\/strong\u003e Zero-order (air-gap)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 1030 nm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount size:\u003c\/strong\u003e 30.48\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClear aperture:\u003c\/strong\u003e \u0026gt;18.0\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eParallelism:\u003c\/strong\u003e \u0026lt;10 arcsec\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetardance tolerance:\u003c\/strong\u003e λ\/300@20°C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSurface quality:\u003c\/strong\u003e 20-10 S-D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTransmitted wavefront error:\u003c\/strong\u003e \u0026lt;λ\/10@633nm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount type:\u003c\/strong\u003e Black anodized metal mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e R\u0026lt;0.2%@1030nm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eStorage \u0026amp; Handling\u003c\/h2\u003e\n\u003cp\u003eStore and use at 25 °C and 40–60% relative humidity. Clean gently with ≥99% alcohol and lint-free lens tissue; avoid abrasives that may damage the coating or air-gap assembly.\u003c\/p\u003e","brand":"Optoman","offers":[{"title":"Default Title","offer_id":47474007212186,"sku":"HWP-AS-ZO-1030-25.4","price":960.0,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08149677312445608_350.png?v=1772512607"},{"product_id":"1-2-wave-plate-1064nm-1","title":"1\/2 Wave Plate 1064nm","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eThis true zero-order air-gap waveplate is built from two crystalline-quartz plates separated by a precision air gap, delivering the low temperature sensitivity, wide acceptance angle, and high damage threshold characteristic of air-spaced zero-order designs. A half-wave (λ\/2) plate rotates the plane of linear polarization.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePolarization rotation \u0026amp; control\u003c\/li\u003e\n  \u003cli\u003eLaser systems \u0026amp; pulse conditioning\u003c\/li\u003e\n  \u003cli\u003eElectro-optic \u0026amp; interferometric setups\u003c\/li\u003e\n  \u003cli\u003ePrecision metrology\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eConstruction \u0026amp; Performance\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSubstrate:\u003c\/strong\u003e Crystalline Quartz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetardance:\u003c\/strong\u003e λ\/2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetardance Order:\u003c\/strong\u003e Zero-order (air-gap)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWavelength:\u003c\/strong\u003e 1064 nm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount size:\u003c\/strong\u003e 25.4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 30.48mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClear aperture:\u003c\/strong\u003e 24\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount type:\u003c\/strong\u003e SM1 threaded mount\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating:\u003c\/strong\u003e AR@1064nm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eStorage \u0026amp; Handling\u003c\/h2\u003e\n\u003cp\u003eStore and use at 25 °C and 40–60% relative humidity. Clean gently with ≥99% alcohol and lint-free lens tissue; avoid abrasives that may damage the coating or air-gap assembly.\u003c\/p\u003e","brand":"WaveQuanta","offers":[{"title":"Default Title","offer_id":47474007507098,"sku":"O-HWP-30.48-BL265","price":413.79,"currency_code":"SGD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/files\/15_08149677315842169_350.png?v=1772512609"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/6156\/3546\/collections\/15_08149677307319515_350.jpg?v=1772514200","url":"https:\/\/waveqvanta.com\/collections\/wq-ultrafast-optics-polarization.oembed","provider":"WaveQuanta","version":"1.0","type":"link"}