1-inch Stainless Steel Optical Mounts MT-AM1S2

LBTEK 1-inch Stainless Steel Mirror Mounts are for optical components with a diameter of 25.4 mm. The optical components are secured using flexible spring pieces and set screws, with a minimum thickness requirement of 2 mm. The M6×0.25 precision adjuster with side holes is used for adjusting the pitch/yaw of the optical component, offering multiple adjustment methods as shown in the right figure: Figure 1: Direct adjustment using a 2.0 mm hex key at the end of the adjuster; Figure 2: Adjustment using the MT-SHR1 side-hole adjustment key; Figure 3: Installation of the MT-HWS1 removable knob for adjustment; Figure 4: Fine adjustment using the HWS-2 hex knob. Additionally, users can opt to add the MT-LN1 adjuster locknuts to enhance the locking function based on requirements. The optical mount features M4 countersunk mounting holes on the side. The purchase includes two M4 thin-head hex screws and one 2.0 mm hex key. Furthermore, the MT-AM1S6 comes with two locknuts, and the MT-AM1S2 includes three locknuts.