Yi-Laser
Blaze-532-30 Picosecond Laser - 30W @ 100 kHz
Contact for pricing
In Stock
Contact Sales
Design Tools
Time-Bandwidth Product
Check if your pulse is transform-limited
Pulse Stretching & Compression
Calculate GVD, TOD, and pulse broadening
View all 49 calculators →
Complete Your Setup
RoHS
REACH
The Blaze series covers 1064 nm, 532 nm and 355 nm with output powers from 30 W to 80 W. All models run TEM00 with M² ≤ 1.3 and beam roundness above 90 %, in a 800 × 364 × 140 mm water-cooled chassis with a warm-up time under 15 minutes.
This page covers the Blaze-532-30 configuration. Specifications below are for this model only; sibling models in the Blaze series are listed as separate products.
Specifications transcribed from the Yi-Laser product page (2026-08-27). Contact WaveQuanta for a quotation, lead time and customisation options.
Other models in the Blaze series
- Blaze-532-8 — the next step down in average power (8 W)
- Blaze-532-80 — the next step up in average power (80 W)
- Blaze-355-30 — the same platform at 355 nm (30 W)
- Blaze-1064-30 — the same platform at 1064 nm (30 W)
Browse the full picosecond solid-state laser range, or see the complete ultrafast laser line.
| Central Wavelength | 532 ± 0.5nm |
| Output Power | 30W @ 100 kHz |
| Repetition Rate | 1Hz - 2MHz |
| Pulse Energy | 300μJ |
| Power Stability | < 1.5%(8 hours, RMS) |
| Pulse Duration | < 7ps |
| Beam Quality | TEM00, M²≤1.2 |
| Beam Roundness | > 90% |
| Beam Diameter | 1.5 ± 0.5mm |
| Burst Pulse Number | 1 - 3 |
| Dimensions | 800 x 364 x 140mm |
| Trigger Mode | PSO / POD / Gate mode, and TTL trigger |
| External Power Control | 0 - 5V, linear control |
| Warm-up Time | 15 min |
| Power Supply | AC100 - 240V / 50 - 60Hz |
| Operating Humidity | < 60% RH @ 25 ℃ |
| Operating Temperature | 22 - 30 ℃ |
| Cooling Method | Water circulation cooling |
No CAD drawings available for this product.
