

DInGaAs-TE Series TE-Cooled InGaAs Detectors, 800–2600 nm, -40 °C
DInGaAs-TE SeriesDesign Tools
Two-stage TE-cooled InGaAs detectors for low-noise near-infrared measurements from 0.8 to 2.6 µm.
DInGaAs-TE series detectors use two-stage thermoelectrically cooled InGaAs photodiodes for the 0.8–2.6 µm range. The DInGaAs1700-TE and DInGaAs2600-TE share the same construction with a 3 mm diameter active area; the sensor is held at -40 °C with ±0.5 °C stability by the ZTC temperature controller.
Key Features
- Two models covering 800–1700 nm and 800–2600 nm
- Two-stage TE cooling to -40 °C, temperature stability ±0.5 °C
- Ø3 mm active area on both models
- Typical NEP of 3.2×10⁻¹⁵ (DInGaAs1700-TE) and 5.5×10⁻¹³ (DInGaAs2600-TE)
- Current output; the ZAMP I-V transimpedance amplifier is recommended before an oscilloscope, lock-in amplifier or the DCS103
- Can be read directly by the DCS300PA data acquisition system, which has built-in amplification
- In cooled mode, operation requires the ZTC temperature controller
Typical Applications
- Low-light near-infrared spectroscopy
- NIR photoluminescence measurements
- Transmission and absorption measurements from 0.8 to 2.6 µm
- Lock-in detection with scanning monochromators
Model Overview
| Model | Spectral Range (nm) | Peak Responsivity (A/W) | D* (typ.) | NEP (typ.) |
|---|---|---|---|---|
| DInGaAs1700-TE | 800–1700 | 0.9 | 8.4×10¹³ | 3.2×10⁻¹⁵ |
| DInGaAs2600-TE | 800–2600 | 1.2 | 4.9×10¹¹ | 5.5×10⁻¹³ |
Related Products
- DSi Series — Silicon Photodetectors
- DInGaAs Series — Room-Temperature InGaAs Detectors
- DField-NIR Series — InGaAs Linear Array Detectors
Browse all: Spectroscopy Detectors · Photodetection
Models: DInGaAs1700-TE, DInGaAs2600-TE · Contact WaveQuanta for a quote, configuration advice and lead time.
| Detector Type | Two-stage TE-cooled InGaAs photodiode |
| Active Area Diameter | 3 mm |
| Spectral Range | 800–1700 nm or 800–2600 nm, depending on model |
| Detector Operating Temperature | -40 °C |
| Temperature Stability | ±0.5 °C |
| Ambient Temperature | +10 to +40 °C |
| Signal Output | Current |
| Output Signal Polarity | P (positive) |
| Temperature Controller | ZTC (required in cooled mode) |
| Recommended Preamplifier | ZAMP I-V transimpedance amplifier |
Product Family: Spectroscopy Detectors (9 variants)
| Product | SKU | Size | Clear Aperture | Operating Wavelength | |
|---|---|---|---|---|---|
| DField-VS-A4 TE-Cooled Spectroscopy CCD, -60 °C Cooling, 30.7 mm Wide Sensor |
DField-VS-A4
| — | — | — | Contact |
| PMTH Series Room-Temperature Photomultiplier Detectors, Side-Window PMTs |
PMTH Series
| — | — | — | Contact |
| DMCT Series Liquid-Nitrogen-Cooled MCT Detectors, 2–22 µm Spectral Range |
DMCT Series
| — | — | — | Contact |
| DInSb Series Liquid-Nitrogen-Cooled InSb Detectors, 1–5.5 µm |
DInSb Series
| — | — | — | Contact |
| DPbS Series Room-Temperature PbS Detectors, 0.8–3.2 µm, Built-in Preamplifier |
DPbS Series
| — | — | — | Contact |
| DField-NIR Series InGaAs Linear Array Detectors, 850–2200 nm Coverage |
DField-NIR Series
| — | — | — | Contact |
| DInGaAs-TE Series TE-Cooled InGaAs Detectors, 800–2600 nm, -40 °C Current |
DInGaAs-TE Series
| — | — | — | |
| DInGaAs Series Room-Temperature InGaAs Detectors, 800–2600 nm, Ø3 mm |
DInGaAs Series
| — | — | — | Contact |
| DSi Series Silicon Photodetectors, 200–1100 nm, 100 mm² Active Area |
DSi Series
| — | — | — | Contact |





