Piezoelectric two-axis optical mount, set screw fixation type AMM-1B-E

The AMM-1B-E and AMM-2B-E optical mounts feature two knurled knobs and a 1/4-80 piezoelectric precision drive design, offering a large piezoelectric angular range and high adjustment resolution. The mount's angular range is selectable at ±3° or ±4°, achieved through both piezoelectric and manual adjustment. The typical step size is 10-30 nm. Using the accompanying piezoelectric motion controller and software, the single-step size can be flexibly adjusted within approximately ±20% of a 10 nm baseline value.

The piezoelectric precision drive self-locks when power is off, making it ideal for applications requiring sub-micron resolution and long-term alignment stability for operation and locking. Manual adjustment is possible at any time as long as the piezoelectric drive is not actively translating the screw.

These piezoelectric mirror mounts come with a controller. They are part of a piezoelectric screw actuator kit including 2 PTP09 piezoelectric screws and 1 controller (sold separately by our company).

The AMM-1B-E is for Ø1 inch optical components, and the AMM-2B-E is for Ø2 inch optical components. Each mount includes an M4 tipped set screw with a 2 mm hex for securing optical components with a minimum thickness of 3 mm. M4 countersunk holes on the side of the mount facilitate installation onto posts and other optomechanical components with M4 threaded holes in either right-hand or left-hand orientations.